Brother International RJ-3050Ai Online Users Guide PDF - Page 128
Print head, Barcode, Printing orientation, Printer Setting Tool, Print Density, Problem, Solution
View all Brother International RJ-3050Ai manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Troubleshooting Problem Printed barcodes cannot be read. Solution Print labels so that barcodes are aligned with the print head as shown below. 1 3 2 1 Print head 2 Barcode 3 Printing orientation Try using another scanner. Set [Print Speed] to a slower option. The print speed can be specified in the "Printer Setting Tool". (See Device Settings on page 67.) Adjust [Print Density]. The print density can be specified in the printer driver's dialog box or the "Printer Setting Tool". (See Device Settings on page 67.) 8 This printer is not designed exclusively for creating bar code labels. Always check that bar code labels can be read by the bar code reader. I want to reset the printer/delete the To reset the printer, perform the following procedure: data transferred from the computer. For RJ-3050/3050Ai 1 Press and hold the (Power) button to turn the printer off. 2 Press and hold the (Feed) button and the (Power) button for about 3 seconds. The POWER, Wi-Fi and Bluetooth indicators start blinking (POWER: in orange; Wi-Fi and Bluetooth: in blue). 3 While pressing the (Power) button, press the (Feed) button 3 times. 4 Release the (Power) button. For RJ-3150/3150Ai 1 Press the [Menu], [ ], or [ ] button to select the [Administration] menu, and then press the [OK] button. (The default password is "1111".) 2 Select [Reset] > [Factory Reset] > [Reset] using [ ] or [ ], and then press the [OK] button. All the transferred data from the computer will be deleted and the printer settings will be reset to the factory settings. I want to cancel the current print job. Make sure that the printer is ON, and press the (Power) button. 119