Brother International SE600 Operation Manual - Page 26
Removing and attaching the presser foot, holder
View all Brother International SE600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Replacing the Presser Foot Removing and attaching the presser foot holder Remove the presser foot holder when cleaning the machine or when installing a presser foot that does not use the presser foot holder, such as the walking foot and quilting foot. ■ Removing the presser foot holder Press . a → The screen changes, and all keys and operation buttons are locked (except ). Remove the presser foot. b • For details, refer to "Replacing the presser foot" on page 23. Use the screwdriver to loosen the presser foot holder c screw. Turn the screw toward the back of the machine (counterclockwise). • The presser foot holder screw can also be loosened or tightened with the disc-shaped screwdriver. Hold the presser foot holder in place with your right d hand, and then tighten the screw using the screwdriver in your left hand. Turn the screw toward you (clockwise). CAUTION • Be sure to securely tighten the presser foot holder screw, otherwise the presser foot holder may fall off and the needle may strike it, causing the needle to bend or break. Press e to unlock all keys and buttons. Press d to unlock all keys and buttons. ■ Attaching the presser foot holder Press . a → The screen changes, and all keys and operation buttons are locked (except ). Raise the presser foot lever. b Align the notch in the presser foot holder with the c screw. 1 Screw 2 Notch in presser foot holder a b 24