Brother International SE600 Operation Manual - Page 55
Heirloom stitching
View all Brother International SE600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Put the extra spool pin in the hole on the top of the d machine and put the spool of thread onto the extra spool pin. 1 Thread spool 2 Extra spool pin a b Utility stitches needle when you select a satin stitch pattern. In this case, use zigzag foot "J". CAUTION • When using the twin needle, be sure to select an appropriate stitch, otherwise the needle may break or the machine may be damaged. Start sewing. j Thread the machine with the second upper thread. e Without passing the thread behind the needle bar thread guide, manually thread the right needle with the second upper thread. Insert the thread through the eye of the needle from the front to the back. 1 Needle bar thread guide a Attach zigzag foot "J". f • For details on changing the presser foot, refer to "Replacing the presser foot" on page 23. CAUTION • When using the twin needle, be sure to attach zigzag foot "J". If bunched stitches occur, use monogramming foot "N" or attach stabilizer material. Press g to unlock all keys and buttons. Press and set [Twin Needle] (page 1 of the settings h screen) to [ON]. CAUTION • When using the twin needle, be sure to select the twin needle setting, otherwise the needle may break or the machine may be damaged. Select a stitch. i • For stitch selection refer to "Basic sewing" on page 25. • Refer to "Stitch Chart" on page 35 for stitches that use a twin needle. You can also sew with a twin CAUTION 3 • Do not try turning the fabric while the twin needle is down in the fabric, otherwise the needle may break or the machine may be damaged. VARIOUS STITCHES ■ Heirloom stitching When sewing with the wing needle, the needle holes are enlarged, creating a lace-like decorative stitch. This is used to decorate hems and tablecloths on thin or medium weight fabrics in addition to plain weave fabrics. Install the wing needle. a • Use a 130/705H 100/16 wing needle. • For details on installing a needle, refer to "Replacing the needle" on page 22. • The needle threader cannot be used with the wing needle, otherwise the machine may be damaged. Manually pass the thread through the eye of the needle from the front to the back. Attach monogramming foot "N". b Select a stitch. c No. 3-02 3-04 3-06 3-10 Stitch • For details, refer to "Stitch Chart" on page 35. CAUTION • When sewing with the wing needle, select a stitch width of 6.0 mm (15/64 inch) or less, otherwise the needle may bend or break. • After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. 53