Brother International SE600 Operation Manual - Page 91
Upgrading your machine's software
View all Brother International SE600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Upgrading your machine's software Operation beeps If a correct operation is performed, the machine beeps one time. If an incorrect operation is performed, the machine beeps two or four times. If the machine locks up, for example, because the thread is tangled, the machine continues to beep for four seconds, and then the machine automatically stops. Be sure to check for the cause of the error, and correct it before continuing to sew. Upgrading your machine's software You can use USB flash drive to upgrade software for your machine. When an upgrade program is available on our website at " http://s.brother/cpjab ", please download the file(s) following the instructions on the website and steps listed below. Note • When using USB flash drive to upgrade the software, check that no data other than the upgrade file is saved on the USB flash drive being used before starting to upgrade. Turn on the machine while pressing and holding a (Needle position button). → The following screen appears. 5 Insert the USB flash drive into the USB port on the b machine. The media device should only contain the upgrade file. APPENDIX Press . c → When upgrading is finished, the completion message appears. Remove the USB flash drive, and turn the machine off d and on again. 89