Brother International TD-4520TN Users Guide - Page 34

Dump mode

Get Brother International TD-4520TN PDF manuals and user guides View all Brother International TD-4520TN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

 Dump mode The printer will enter dump mode after printing the printer configuration. This mode allows users to verify and debug the printer's programs. The characters in the left column are received from the printer's system and those in the right column are their hexadecimal representation. ASCII data Hexadecimal representation of the ASCII data Note  Dump mode requires 4" (101.5 mm) wide paper.  To resume normal printing, turn the printer off and then on again. 4.3.3 Printer Initialization Printer initialization clears the printer's DRAM and restores its factory settings. To activate printer initialization: 1. Turn off the printer. 2. Press and hold the Feed/Pause Button, and then turn on the printer. 3. Release the button after the amber LED flashes five times and the LED is lit in green. Note The LED color will change as follows: Amber  red (5 times)  amber (5 times)  green (5 times)  green/amber (5 times)  red/amber (5 times)  green (lit) 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
30
Dump mode
The printer will enter dump mode after printing the printer configuration. This mode allows users
to verify and debug the printer's programs. The characters in the left column are received from
the printer's system and those in the right column are their hexadecimal representation.
Note
Dump mode r
equires 4” (101.5 mm) wide paper.
To resume no
rmal printing, turn the printer off and then on again.
4.3.3 Printer Initialization
Printer initialization clears the printer's DRAM and restores its factory settings.
To activate printer initialization:
1. Turn off the printer.
2. Press and hold the Feed/Pause Button, and then turn on the printer.
3. Release the button after the amber LED flashes five times and the LED is lit in green.
Note
The LED color will change as follows:
Amber
red (5 times)
amber (5 times)
green (5 times)
green/amber (5 times)
red/amber (5 times)
green (lit)
ASCII data
Hexadecimal representation of
the ASCII data