Brother International TD-4520TN Users Guide - Page 35

Media Sensor Calibration For the Black Mark Sensor

Get Brother International TD-4520TN PDF manuals and user guides View all Brother International TD-4520TN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

After the initialization, the following factory settings will be restored: Parameter Speed Density Label Width Label Height Sensor Type Gap Setting Print Direction Reference Point Offset Tear Mode Label Peeler Off Mode Cutter Mode Code Page Country Code Clear Flash Memory Default Values 127 mm/sec (5 ips) (203DPI) 76 mm/sec (3 ips) (300DPI) 8 4" (101.5 mm) 4" (101.5 mm) Gap Sensor 0.12" (3 mm) 0 0,0 (upper left corner) 0 On Off Off 850 001 No 4.3.4 Media Sensor Calibration (For the Black Mark Sensor) 1. Turn off the printer. 2. Press and hold the Feed/Pause Button, and then turn on the printer. 3. Release the button after the green LED flashes five times and when the LED is lit in green/amber. Note The LED color will change as follows: Amber  red (5 times)  amber (5 times)  green (5 times)  green/amber (5 times)  red/amber (5 times)  green (lit) 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
31
After the initialization, the following factory settings will be restored:
Parameter
Default Values
Speed
127 mm/sec (5 ips) (203DPI)
76 mm/sec (3 ips) (300DPI)
Density
8
Label Width
4” (101.5 mm)
Label Height
4” (101.5 mm)
Sensor Type
Gap Sensor
Gap Setting
0.12” (3 mm)
Print Direction
0
Reference Point
0,0 (upper left corner)
Offset
0
Tear Mode
On
Label Peeler Off Mode
Off
Cutter Mode
Off
Code Page
850
Country Code
001
Clear Flash Memory
No
4.3.4 Media Sensor Calibration (For the Black Mark Sensor)
1. Turn off the printer.
2. Press and hold the Feed/Pause Button, and then turn on the printer.
3. Release the button after the green LED flashes five times and when the LED is lit in
green/amber.
Note
The LED color will change as follows:
Amber
red (5 times)
amber (5 times)
green (5 times)
green/amber (5 times)
red/amber (5 times)
green (lit)