Brother International TD-4520TN Users Guide - Page 36
Media Sensor Calibration For the Gap Sensor, 3.6 Skip the AUTO.BAS program
View all Brother International TD-4520TN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4.3.5 Media Sensor Calibration (For the Gap Sensor) 1. Turn off the printer. 2. Press and hold the Feed/Pause Button, and then turn on the printer. 3. Release the button after the green/amber LED flashes five times and the LED is lit in red/amber. Note The LED color will change as follows: Amber red (5 times) amber (5 times) green (5 times) green/amber (5 times) red/amber (5 times) green (lit) 4.3.6 Skip the AUTO.BAS program The user can upload the AUTO.BAS program to the printer's flash memory so that it can be run automatically at startup. To prevent the AUTO.BAS program from running at startup: 1. Turn off the printer. 2. Press the Feed/Pause Button, and then turn on the printer. 3. Release the button when the LED is lit in green. Note The LED color will change in the following order: Amber red (5 times) amber (5 times) green (5 times) green/amber (5 times) red/amber (5 times) green (lit) 4. The printer will start without running the AUTO.BAS program. 32