Home » Brother International Manuals » Label Makers » Brother International TD-4520TN » Manual Viewer

Brother International TD-4520TN Users Guide - Page 43

Important

View all Brother International TD-4520TN manuals

Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Note  Do not touch the Print Head. If you have touched it, clean it as described above.  Do not use medical alcohol as it may damage the Print Head. Use isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable.  To maintain the printer's correct performance, we recommend cleaning its Print Head and sensors every time you install a new ribbon. IMPORTANT Securely dispose of any printers, components, and supplies if they are no longer going to be used. Ensure there is no jammed paper in the printer and destroy the thermal transfer ribbon if it has retained any visible prints. 39

Section	Page
User's Guide TD-4420TN/4520TN	1
Contents	3
1. Introduction	5
1.1 Product Introduction	5
1.2 Product Features	6
1.2.1 Standard Features	6
1.2.2 Optional Features	7
1.3 General Specifications	7
1.4 Print Specifications	7
1.5 Ribbon Specifications	8
1.6 Media Specifications	8
2. Operations Overview	9
2.1 Unpack the printer and check the components	9
2.2 Printer Overview	10
2.2.1 Front View	10
2.2.2 Interior View	11
2.2.3 Rear View	12
3. Setup	13
3.1 Setting up the Printer	13
3.2 Loading the Ribbon	14
3.3 Loading the Media	18
3.3.1 Loading the Label Rolls	18
3.3.2 External Label Roll Mount Installation (Optional)	22
3.3.3 Loading the Media in Cutter mode (Dealers only)	24
3.3.4 Loading the Media in Peel-off Mode (Dealers only)	26
4. The LED Indicator and Feed/Pause Button Functions	29
4.1 The LED Indicator	29
4.2 The Feed/Pause Button Functions	29
4.3 Power-on Utilities	29
4.3.1 Ribbon and Gap/Black Mark Sensors Calibration	30
4.3.2 Gap/Black Mark Sensor Calibration, Self-Test, and Entering Dump Mode	31
4.3.3 Printer Initialization	34
4.3.4 Media Sensor Calibration (For the Black Mark Sensor)	35
4.3.5 Media Sensor Calibration (For the Gap Sensor)	36
4.3.6 Skip the AUTO.BAS program	36
5. BPM (Brother Printer Management Tool)	37
5.1 Start the BPM	37
5.2 Printer Function	38
5.3 Calibrating the Media Sensor using the BPM	39
5.3.1 Auto Calibration	39
6. Troubleshooting	40

Match case Limit results 1 per page

Note



Do not touch the Print Head. If you have touched it, clean it as described above.



Do not use medical alcohol as it may damage the Print Head. Use isopropyl alcohol or

ethanol according to the manufacturer's safety guidelines, as applicable.



To maintain the printer's correct performance, we recommend cleaning its Print Head and

sensors every time you install a new ribbon.

IMPORTANT

Securely dispose of any printers, components, and supplies if they are no longer going to be used.

Ensure there is no jammed paper in the printer and destroy the thermal transfer ribbon if it has

retained any visible prints.