Brother International XL-6452 User Manual - French - Page 78
Icaution
View all Brother International XL-6452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
A ifs I° Ittn I O C OPTIONAL ACCESSORIES Using the Walking Foot ' Pattern (Straight Stitch) (Zigzag Stitch) Sti ch Length 1-4 Stitch Width 2-3 0-5 This foot is very useful for sewing materials st h as vinyl cloth, synthetic leather, thin leather, etc. these mate iIs are difficult to feed when sewing. The walking fool prevents at h materials from crumpling, slipping or sticking between presser clot and material due to even feeding of upper and lower material t. NOTE: Use foot only for straight sewing al id zigzag stl4 hing. Do not use other patterns. 1. Remove the power supply plug from the outlo t. 2. Raise the needle and the press it foot. 3. Loosen the presser foot screw to remove the p, esser foot holder. (See fig. A ) 4. Attach the forked section of the connecting It ver to the needle clamp, install the walking foot to the presser 'ar. (See fig 8 ) 5. Lower the presser foot lever aid then tightth the accessory presser bar holder fixing screw. (See fig.0 ) O Forked part of operation lever C) Presser bar holder 0 Use a screwdrive, A CAUTION • Use the screwdriver to tighten the screw securely. If the screw is loose, the needle may strike the presser foot and cause injury. • Be sure to turn the balance wheel towanI the front of the machine fo check that the needle does not strike the presser toot. If the needle s rikes the presser foot, injury may re: ult. • Be careful not to touch the reedle durinc this time, otherwise injury may result. CAUTION When sewing with the walking fo At, sew at me Hum to low speeds. 69