Canon 2677B002 SX80 Manual - Page 119
If You Want to Reset the Network Setting, Error Notification Message
![]() |
View all Canon 2677B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Setting an IP Address 6 Click [Apply] in the menu. When "Save and apply settings. OK?" message appears, click the [OK] button. This completes the IP address setting of the projector. ■If You Want to Reset the Network Setting 1 Access to the projector from web browser by performing the step 1 on "Setting Net- work (P117)." 2 Click [Initialize] in the network setting page. 3 Click the [OK] button when "Initialize network settings?" message appears. • To restore the settings with the projector operation, execute [Network setting initialization] from the menu. ■Error Notification Message If errors occur in the projector, the following messages are sent. Error list Error name Errors related to temperature Text Errors related to the lamp Error name Text Errors related to the lamp cover Error name Text Errors related to the cooling fan Error name Text Errors related to the power supply Error name Text Other types of errors Error name Text Temperature abnormality The temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated normally, turn off the projector to cool its inside, and retry projection. If the same warning occurs again, the projector may be defective. Contact your dealer. Faulty lamp The lamp has burnt out. Replace the lamp with a new one. If the same warning occurs again, the lamp drive circuit may be defective. Contact your dealer. Faulty lamp cover The lamp cover is open. Check whether the lamp cover is installed properly. If it is installed properly, the lamp cover detection switch may be defective. Contact your dealer. Faulty cooling fan The cooling fan or another component may be defective. Contact your dealer. Faulty power supply The voltage of part of the power supply is abnormally high or any other problem has occurred in the power supply. Contact your dealer. Unknown Error Codes in hexadecimal numbers* * Contact your Canon dealer. Operating the Projector over Network 119
![](/manual_guide/products/canon-sx80-sx80-manual-0462a88/119.png)