Canon 2677B002 SX80 Manual - Page 97
Extending the Menu Display Time, Setting a Password, Normal] is the factory default.
View all Canon 2677B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Setting Various Function Extending the Menu Display Time [Other settings] - [Menu display time] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB System settings Other settings Menu display time You can extend the menu display time, which is 30 seconds usually, to 3 minutes. Setting a Password [Other settings] - [Password settings] HDMI DIGITAL PC ANALOG PC COMPONENT VIDEO/S-VIDEO USB System settings Other settings Password settings Disables the projector unless the correct password is entered. Setting Up Functions from Menus < Normal The menu is displayed for 30 seconds. Extended The menu is displayed for 3 minutes. Press the OK button to accept your setting and then press the MENU button. • [Normal] is the factory default. • You cannot extend the display time for the window indicating the completion of Auto setup (P46), the guide window (P95), the lamp replacement window (preparation) (P129), or the lamp replacement window (warning) (P129). Off The projector can be used even if no password is entered. On The projector cannot be used unless you enter your password. Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. • You cannot set [On] unless you have com- pleted [Register password]. Once you set a password, the password entry screen appears at power-on. Enter a 4-digit password with If the password is valid, the projection starts. If you enter a wrong passwords three times, the power will be turned off. To Cancel the Password First, remove the power plug from the AC outlet, and insert the power plug while holding down the MENU button. After a little, a beep sounds and the password set is cancelled. (The registered password is also reset.) < 97