Canon 2677B002 SX80 Manual - Page 18
Do Not Use in the Following Environments, Condensation
View all Canon 2677B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Safety Instructions Caution Position the projector in a horizontal position. • Install the projector correctly. Incorrect installation may cause troubles and acci- dents. 20° • Do not tilt the projector more than 20 degrees above and below the horizontal. 20° • When you want to use your projector point- ing up or down, make sure to place the projector straight up or down. • Do not install the projector vertically. Do Not Use in the Following Environments • Do not place the projector on an unstable or slanted surface. The projector may fall causing a personal injury. • Do not place it in an oily, smoky, or damp location (e.g., near a cooking table or a humidifier). It may cause a fire or an electric shock. • Do not place it near an exhaust outlet of air-conditioning equipment. • Do not install the projector in a humid or dusty location or a position where there is a lot of oily or cigarette smoke. Optical parts such as a lens and mirror may be stained, resulting in poor picture quality. • Do not use the projector in a place subject to either very high or very low temperatures. Doing so may cause malfunction. • Operating temperature: +5°C to +35°C (Humidity: 85% or below) • Storage temperature: -10°C to +60°C (Humidity: 90% or below) Condensation • If the projector is carried from a cold place to a warm place or the room tem- perature is raised rapidly, condensation may form on the lens and mirror due to the moisture in the atmosphere, resulting in a blurred picture. Wait until condensation evaporates and normal picture is shown. Using the Projector at 2300 Meters or More Above Sea Level • If you use the projector at 2300 meters or more above sea level, the special configuration is required to cool down the projector properly. Contact your dealer. 18