Canon 9353A004 elan7n_instructions.pdf - Page 36

Imprinting the Date or Time (DATE Model only) Setting the Date and Time 1 Select the date or time display. • Press the button. 2 Select the digit to be set. • Press the button until the digit blinks. sEach time you press the button, the settable digit will change as follows: Year → month → day. Or hour → minute →"a" 3 Set the correct number. • Keep pressing the button until the correct number appears. • Repeat steps 2 and 3 until all the date and time digits are set correctly. 4 Finalize the setting. • Keep pressing the button until no digits blink. • If "a" is blinking and you press , the seconds will be reset to 0. Replacing the Date Battery When the date/time on the imprinted photograph looks faded, replace the CR2025 lithium battery as follows. Battery life is about 3 years. 1 Remove the battery chamber cover. • Open the camera back and loosen the screw as shown in the illustration. 2 Take out the battery. 3 Insert a new battery. • The battery's positive contact (+) must face up. 4 Reattach the battery chamber cover. • Set the correct date and time. 36