Canon 9353A004 elan7n_instructions.pdf - Page 49
Eye Control Servo AF, Turning Off Eye Control
UPC - 077701521646
View all Canon 9353A004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
6 Keep looking at the focusing point you want to select and press the shutter button halfway. sThe icon lights in the viewfinder. sThe AF point you look at will flash in red and focus the subject. 7 Take the picture. • If the camera fails to detect which AF point you are looking at, the icon in the viewfinder will blink and automatic AF point selection will take effect. • If Eye Control does not work well, check if you are using the correct CAL No. and see "Eye Control Calibration and Operation Tips" on page 46. Eye Control Servo AF When you use Eye Control in the AI Servo AF mode (or AI Focus AF set to AI Servo AF), you can focus a moving subject continuously just by looking at it. This is called Eye Control Servo AF. If the subject focused with Eye Control starts to move, you can continue to focus-track the subject with your eye by looking at the next AF point covering the subject while holding down the shutter button halfway. Turning Off Eye Control Turn the Eye Control switch to . The AF point can then be selected automatically or manually. 49