Canon 9353A004 elan7n_instructions.pdf - Page 76

KWireless Remote Control With Remote Controller RC-1 (sold separately), wireless operation is possible up to 5 m/16.4 ft away from the front of the camera. Remote control sensor 1 Turn the film advance mode lever to . sThe icon appears on the LCD panel. 2 Take the picture. • Point the signal transmitter toward the camera's remote control sensor and press the signal button. sThe remote control lamp will light, and the picture will be taken. • For details on using the remote control, see the RC-1's instructions. Certain types of fluorescent light may cause camera misoperation. During wireless remote control, try to keep the camera away from fluorescent light. • You can also use Remote Controller RC-5 (sold separately). • If you set the film advance mode lever to and do nothing for four minutes, the wireless remote control mode will be canceled automatically to save battery power. Using the Remote Switch Connect the Remote Switch RS60E3's (sold separately) plug to the camera's remote control terminal. To take a picture, press the Remote Switch's shutter-release button. 76