Canon DP-V1710 User Manual

Canon DP-V1710 Manual

Get Canon DP-V1710 PDF manuals and user guides View all Canon DP-V1710 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon DP-V1710 manual content summary:

  • Canon DP-V1710 | User Manual - Page 1
    PUB. MIE-0014-000 Video Display • Before use, be sure to read this guide, including the safety and handling precautions. • Reading this guide will help you learn to use the video display properly. • Store this guide safely so that you can use it in the future. Instruction Manual English
  • Canon DP-V1710 | User Manual - Page 2
    3 About this manual 3 Trademarks 3 Supplied Accessories 3 Important Usage Instructions 4 Safety Instructions and Handling Precautions Dimensions 81 Appendix 82 Supported Signal Format 82 Image/Frame Display 96 Error Messages 99 Troubleshooting 102 Software Used in
  • Canon DP-V1710 | User Manual - Page 3
    . Supplied Accessories The following items are supplied with this product. Please check before using. AC Power Cord HT-21 AC Power Cord clamp HC-01 DP-V1710 Instruction Manual (this document)
  • Canon DP-V1710 | User Manual - Page 4
    installed and used in accordance with the instruction manual, may cause harmful interference to radio received, including interference that may cause undesired operation. Canon U.S.A Inc. One Canon Park, Melville, NY 11747, U.S.A. Tel No. waste disposal service. For more information regarding return and recycling
  • Canon DP-V1710 | User Manual - Page 5
    cause fire, electric shock or malfunction. • Be sure to use the correct voltage. Using a power source with a voltage other than that specified in this instruction manual can cause fire or electric shock. Always use the supplied (or specified) AC power cord. For your safety, do not use this AC power
  • Canon DP-V1710 | User Manual - Page 6
    Safety Instructions and Handling Precautions • Observe the following precautions regarding the power source and power plug. Failing to do so can cause fire or electric shock. -- Insert
  • Canon DP-V1710 | User Manual - Page 7
    Safety Instructions and Handling Precautions CAUTION Denotes the risk of injury. • Do not place any objects on the video display and do not climb on it. 7 The
  • Canon DP-V1710 | User Manual - Page 8
    Safety Instructions and Handling Precautions When Using the Main Unit • The screen warm during use. Note this does not constitute a malfunction. About Backlight The backlight has a limited service life so its brightness may degrade and color may change due to aging. About Temporary Screen burn-in
  • Canon DP-V1710 | User Manual - Page 9
    Safety Instructions and Handling Precautions Disposing • Do not dispose together with normal waste. Do not include the video display in waste that will be taken to landfill. • Observe the rules and regulations of your local authorities when disposing. 9
  • Canon DP-V1710 | User Manual - Page 10
    DP-V1710 Video Display provides a wide range of support for video production as a way to check video on location, in a secondary control room in a studio, or in a live broadcast vehicle. 17-Inch 4K display • Supports EOS SYSTEM link (Supports "Canon Log", "Canon Log 2", and "Canon Log 3". Equipped
  • Canon DP-V1710 | User Manual - Page 11
    Nomenclature Front face of the main unit 11 1 2 3 3 Aa 4 5 67 8 9 Aq 1 Carrying handle ( 13) 2 Tally light ( 34) 3 Front stand ( 15) 4 Headphone terminal ( 59) 5 USB port For connecting an external sensor for calibration ( Tangent Wave Ltd). 6 Channel (CH) button CH1 to CH3 ( 33) 7 
  • Canon DP-V1710 | User Manual - Page 12
    . Note • About USB Memory -- Both FAT16 and FAT32 USB memory devices are supported. -- Proper operation cannot be guaranteed for all USB memories. -- It may take Display Controller CL-01 (provided with the DP-V3010) with the main unit, update the controller firmware version to 4.19.0 or later.
  • Canon DP-V1710 | User Manual - Page 13
    Installation/Connection Carrying the video display 13 When carrying the video display, be sure to hold it by the carrying handle. CAUTION • When carrying the video display, handle it carefully not to touch or damage the screen. Removing the carrying handle The carrying handle can be removed. 1
  • Canon DP-V1710 | User Manual - Page 14
    when carrying the video display or when using it outdoors. The separately-sold PP-17U Protect Panel is attached as follows. Please also see the instruction manual for the 14 PP-17U Protect Panel. CAUTION • Avoid touching the screen during this step as it may damage it. Use the HK-02 Hex
  • Canon DP-V1710 | User Manual - Page 15
    Installation/Connection Removing/attaching the stand The main unit is supplied with two stands which can be detached. CAUTION 15 • Use a flat, clear surface when attaching/detaching the stands. • The display can tip over if the stand has not been attached. • Avoid touching the screen during
  • Canon DP-V1710 | User Manual - Page 16
    Installation/Connection Preventing from Tipping The video display can be fastened down to a desk or table by using the screw holes on the stand. 16 CAUTION • When securing the main unit to a table or desk, please ensure the table or desk is strong enough to carry the weight of the main unit. •
  • Canon DP-V1710 | User Manual - Page 17
    Installation/Connection Mounting the Main Unit on a Stand or Wall This main unit can be fitted to a stand* or to a wall mount bracket*. Remove the stands beforehand ( 15). * Commercially available. 17 CAUTION • For safety, make sure to perform this step with at least two people. • When mounting the
  • Canon DP-V1710 | User Manual - Page 18
    starting work ( 13, 15). The Rack Mount Bracket is supplied with the SW-04 and SW-05 screws for attaching it. Please also see the instruction manual for the RB-02 Rack Mount Bracket. CAUTION • For safety, make sure to perform this step with at least two people. • When the video display
  • Canon DP-V1710 | User Manual - Page 19
    Installation/Connection • Screw positions for attaching the display at -15, -6, +6, or +15 degrees -15/-6/0 degrees 15 degrees 6 degrees -15 degrees -6/6 degrees 15 degrees 0 degree Approx. 334 mm 19 Approx. 320 mm -15 degree angle -6 degree angle Approx. 312 mm Approx. 322 mm 6 degree
  • Canon DP-V1710 | User Manual - Page 20
    Installation/Connection Connecting the Main Unit to Input Devices The video display has 6G/3G/HD-SDI and HDMI input terminals to connect input devices. 20 CAUTION • Check that the power of the video display and input devices is switched off before connecting. SDI input signals SDI (IN)
  • Canon DP-V1710 | User Manual - Page 21
    Installation/Connection Reference • The connection is tested using Canare Corp. BNC cable (multi) 4VS03A-5C. • When 3G-SDI RAW signal frequency exceeds 30.00P, it becomes a dual connection. • Each input terminal is compatible with through output. When signals are input from Input A, connect the
  • Canon DP-V1710 | User Manual - Page 22
    the main unit. The brightness of the power indicator can be set from [Off] or [1 (dark)] to [5 (brightest)] ( 73). The power indicator will flash during firmware updates or when an error is detected even if it is set to [Off]. Off: when power supply is not connected Green lit: when a power
  • Canon DP-V1710 | User Manual - Page 23
    Turning on the Power Attaching/detaching the HC-01 AC Power Cord Clamp (provided) Attaching Install the AC power cord clamp before connecting the AC power cord to the main unit. 1 Insert the AC power cord clamp connector into the cord clamp mounting hole (1). 2 Connect the AC power cord to the
  • Canon DP-V1710 | User Manual - Page 24
    Operating the Video Display 24 Using buttons and jog dial on the video display, you can adjust image quality and configure settings for input signals. In addition, you can assign frequently used functions to the CH (Channel) and F (Function) buttons. Basic operations to use the OSD menu MENU button
  • Canon DP-V1710 | User Manual - Page 25
    selection frame is on setting options. • A slider appears at the bottom of the screen. 2 Make adjustments using the jog dial with using the slider as guide. 3 When adjustments are completed, press the jog dial. • The screen returns to the original OSD menu.
  • Canon DP-V1710 | User Manual - Page 26
    B] can be set individually using the jog dial ( ). 2 Select one. • The setting screen for [Gain] or [Bias] will be displayed. 3 Switch the guide in the upper right area of the slider screen using the jog dial ( ). • The indication changes to [RGB], [R], [G], and [B]. Selecting [RGB] will allow
  • Canon DP-V1710 | User Manual - Page 27
    Operating the Video Display Temporarily Saving Parameters (Anchor Point Setting) You can temporarily save parameters for [Contrast], [Brightness], [Chroma], and [Sharpness]. See 44 for setting anchor points during CDL adjustment. 1 Open the [Anchor Adjustment] menu. 27 [Adjustment] [Anchor
  • Canon DP-V1710 | User Manual - Page 28
    ( 46) You can perform calibration using an external sensor, without using a computer. The supported external sensors are Konika Minolta Display Color Analyzers CA-310 and CA-210. Be sure to also read the instruction manual of the CA-310 and CA-210. 1 Connect the display color analyzer to the USB
  • Canon DP-V1710 | User Manual - Page 29
    . Main Unit Konica Minolta Universal Measuring Probe CA-310 support: CA-PU32, CA-PU35 CA-210 support: CA-PU12, CA-PU15 Konica Minolta Display Color Analyzer error may occur. Refer to the CA-310 and CA-210 instruction manual for the detail operation. • Warming-up is necessary to stabilize
  • Canon DP-V1710 | User Manual - Page 30
    LUT] or [Gamut LUT]. • Refer to the "Concept Drawing of Display Image Processing and LUT". Or, also refer to the "User LUT Creation Guide" on the Canon website. 5 Select [Select LUT] using the jog dial. • Selects User LUT 1-8/Gamma LUT 1-8/Gamut LUT 1-8. 6 Select the standard color gamut using the
  • Canon DP-V1710 | User Manual - Page 31
    Operating the Video Display Export/Import Main Menu Settings ( 74) 1 Open the [Export/Import] menu. [System Settings] [Export/Import] 2 Select [Export] or [Import] using the jog dial. 31 Exporting 1Select [Target] from [USB] or [User 1] to [User 3]. Export [USB] to the USB memory and [User 1]
  • Canon DP-V1710 | User Manual - Page 32
    Operating the Video Display Set Date/Time ( 72) This section describes how to set the Date/Time. The Date/Time of this video display will be reset if the power cord is not connected for about 20 days. 32 1 Open the [Date/Time] menu. [System Settings] [Date/Time] • A screen to input the Date/Time
  • Canon DP-V1710 | User Manual - Page 33
    LUT Bypass Reference • You can check the function assigned to the F buttons of the main unit. Open the [Function Settings] [Various Function] [Function Guide] menu and select [On]. Pressing the jog dial while OSD is not showing will display the list of functions ( 68). Using the Channel (CH
  • Canon DP-V1710 | User Manual - Page 34
    Off Off Off Off Channel Name (Blank) (Blank) (Blank) (Blank) Picture Mode ITU-R BT.709 ITU-R BT.709 Canon Log ITU-R BT.709 Picture Mode R ITU-R BT.709 ITU-R BT.709 Canon Log ITU-R BT.709 Audio Input Input A Input A Input A Input A Marker/TC/WFM/VEC Input Input A Input A Input
  • Canon DP-V1710 | User Manual - Page 35
    dial to determine the selection. • The setting is confirmed. Operating the video display using an external device LAN terminal The video display supports Television Systems Ltd.'s "TSL UMD Protocol Ver. 5.0". You can operate the video display using an external device connected to the LAN terminal
  • Canon DP-V1710 | User Manual - Page 36
    OSD Menu 36 OSD Menu Index Adjustment ( 40) Picture Mode Contrast Brightness Chroma Sharpness Backlight Control Color Temperature Color Gamut Gamma HDR Range Color Range Input Transform Output Transform Output Transform Surround CDL/User LUT Type CDL Preset User LUT Power Saturation Offset Slope
  • Canon DP-V1710 | User Manual - Page 37
    Display Settings ( 56) Screen Scaling Scaling Method Zoom Zoom Preset Magnification Position Audio Settings ( 59) SDI Group CH L/R (SDI) CH L/R (HDMI) Marker Settings ( 60) Marker Preset Aspect Marker Enable Mask Aspect Ratio Line Line Width Line Color Line Brightness H Position V Position Safety
  • Canon DP-V1710 | User Manual - Page 38
    Hold Capture Source Playback File Finish Playback File Various Function Monochrome, Blue Only, Red Off, Green Off, Blue Off, Banner, Function Guide Camera Link Automatic Adjustment (CINEMA EOS) Color Gamut/Gamma Color Temperature Color Range Display Color Gamut Automatic Adjustment (ARRI) User LUT
  • Canon DP-V1710 | User Manual - Page 39
    Brightness Display Button LED Fan Settings Fan Control Fan Stop Signal Information ( 78) System Information ( 78) Compatible Settings HDMI Protect Settings Password Protect Target Protect Firmware Update Export/Import Export Import Power on Setting Reset All Settings OSD Menu 39
  • Canon DP-V1710 | User Manual - Page 40
    Sub Menu Setting Options (Bold: factory default) Picture Mode SMPTE-C EBU ITU-R BT.709 ITU-R BT.2020 Adobe RGB DCI-P3 User 1 to User 7 Canon Log ACESproxy Select a preset mode. [SMPTE-C], [EBU], [ITU-R BT.709], [ITU-R BT.2020], [Adobe RGB], [DCI-P3]: Mode set to the brightness, color temperature
  • Canon DP-V1710 | User Manual - Page 41
    preset gamma. [Canon Log (HDR)], [Canon Log 2 (HDR)], [Canon Log 3 (HDR)], [SMPTE ST 2084], [Hybrid Log-Gamma Y], [Hybrid Log-Gamma RGB]: Select the gamma for HDR display. [Gamma LUT 1] to [Gamma LUT 8]: Selects an external LUT.  About [Hybrid Log-Gamma] This video display supports the following
  • Canon DP-V1710 | User Manual - Page 42
    of the video display corresponds to the value set for Contrast. Canon Log 800% signal (Contrast: [3000]) Canon Log (HDR): Set to [800] Canon Log (HDR): Set to [300] Canon Log range DP-V1710 range Canon Log range DP-V1710 range Gradation is reproduced by assigning 800% the range to the
  • Canon DP-V1710 | User Manual - Page 43
    OSD Menu Sub Menu Input Transform Automatic Off Output Transform ITU-R BT.709 ITU-R BT.2020 DCI-P3 Output Transform Surround Dim Surround Dark Surround Color Range6 Automatic Full (0-255) Limited 1 (16-235) Limited 2 (16-255) Setting Options (Bold: factory default) When [Picture Mode] or [
  • Canon DP-V1710 | User Manual - Page 44
    OSD Menu Sub Menu CDL/User LUT7 Setting Options (Bold: factory default) Configures settings for CDL or User LUT. Type 44 CDL User LUT Off Select the type. When [Type] [CDL] CDL Preset CDL 1 to CDL 15 Selects a preset of the CDL. Power 0.50 to 4.00 (1.00) Adjusts the Gamma of the image.
  • Canon DP-V1710 | User Manual - Page 45
    OSD Menu Sub Menu Detail Settings LUT Import Filename LUT Type Select LUT Base Color Gamut Execute LUT Name LUT Type Select LUT Input Name LUT Delete LUT Type Select LUT Delete YCbCr Color Matrix Setting Options (Bold: factory default) Sets details for Picture Mode. You can import LUT. File
  • Canon DP-V1710 | User Manual - Page 46
    0.45. When [Picture Mode] or [Color Gamut] [ITU-R BT.2020] [Gamut Mapping]: Mapping is performed on colors outside the native color gamut by Canon's unique method. [Clipping]: Colors outside the native color gamut are clipped by a general method. Sets the peak brightness. The maximum value for each
  • Canon DP-V1710 | User Manual - Page 47
    OSD Menu Sub Menu Color Gamut Gamma Start Copy Picture Mode10 Picture Mode Execute Picture Mode Name Anchor Adjustment Reset Setting Options (Bold: factory default) SMPTE-C Sets the color gamut. EBU ITU-R BT.709 ITU-R BT.2020 47 Adobe RGB DCI-P3 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886 Sets
  • Canon DP-V1710 | User Manual - Page 48
    preset mode. • The displayed color coordinates (x, y) are just a guide and not guaranteed absolute values. 4 • For checking the video captured with Cinema EOS cameras, please refer to the "Parameter of Cinema EOS cameras and DP-V1710 ( 71)". • Depending on the input image color range, this
  • Canon DP-V1710 | User Manual - Page 49
    , Gamma LUT 1 to Gamma LUT 8 Cinema Gamut to 709, Canon Log, Canon Log (HDR), Canon Log 2, Canon Log 2 (HDR), Canon Log 3, Canon Cinema Gamut to DCI Log 3 (HDR) Cinema Gamut to 2020 Canon Log, Canon Log (HDR), Canon Log 2, Canon Log 2 (HDR), Canon Log 3, Canon Log 3 (HDR) DCI-P3 to 709, ITU-R BT
  • Canon DP-V1710 | User Manual - Page 50
    be Set Picture Mode DCI-P3 Color Gamut Gamma DCI-P3 Cinema Gamut to DCI DCI-P3+ to DCI Canon Log (HDR) Canon Log 2 (HDR) Canon Log 3 (HDR) SMPTE ST 2084 Canon Log Canon Log 2 Canon Log 3 Full (0-255) Limited 2 (16-255) Other than the above Limited 1 (16-235) 7 • When [User LUT] is selected
  • Canon DP-V1710 | User Manual - Page 51
    OSD Menu ■■Details of the factory default settings for each [Picture Mode] Item SMPTE-C EBU ITU-R BT. 709 ITU-R BT.2020 Adobe RGB Contrast Brightness 1000 1000 1000 1000 1000 51 0 0 0 0 0 Chroma 1000 1000 1000 1000 1000 Sharpness 0 0 0 0 0 Local Dimming Low Low Low
  • Canon DP-V1710 | User Manual - Page 52
    User LUT YCbCr Color Matrix 2020 Constant Luminance 2020 Gamut Mapping Hybrid Log-Gamma System HDR/SDR View DCI-P3 User 1 to User 7 Canon Log ACESproxy 480 1000 1000 480 0 0 0 0 1000 1000 1000 1000 0 0 0 0 Low Low Low Low DCI-P3 D65 D65 D60 0.314 0.313 0.313 0.322
  • Canon DP-V1710 | User Manual - Page 53
    . Select the [Select Channel] and choose a channel number from CH1 to CH20. Finally define the parameter of each of the [Channel Settings].  "Supported Signal Format" ( 82) 53 Sub Menu Setting Options Select Channel1 CH1 to CH20 Display the channel number. In addition, you can assign each
  • Canon DP-V1710 | User Manual - Page 54
    Options Sets the display method when using either [Quad Input] or [Dual Input]. Two division methods "Square Division" and "2 Sample Interleave" are supported for 4K video signals. When [Input Configuration] [6G/3G/HD-SDI], and [Select Input Signal] [Quad Input] Automatic Square Division 2 Sample
  • Canon DP-V1710 | User Manual - Page 55
    OSD Menu Sub Menu Channel Name Picture Mode Picture Mode R Audio Input4 Marker/TC/WFM/VEC Input5 Picture Function Target Setting Options Sets the name of the selected channel. You can input up to 16 alphanumeric characters. Sets the [Picture Mode]. 55 Sets the [Picture Mode] for the right
  • Canon DP-V1710 | User Manual - Page 56
    OSD Menu Display Settings This menu is used to configure the display method. Sub Menu 56 Screen Scaling1 Native Input Resolution 200% Automatic Setting Options (Bold: factory default) Defines how the video is scaled and displayed on the screen. [Native Input Resolution]: Displays the input
  • Canon DP-V1710 | User Manual - Page 57
    Options (Bold: factory default) Sets the interpolation method when [Screen Scaling] is set to [200%] or [Automatic]. [Shape Trace]: Canon original processing that produces smooth slopes 57 with reduced jagged lines. [Bicubic]: General interpolation process that uses neighboring pixel information
  • Canon DP-V1710 | User Manual - Page 58
    OSD Menu Sub Menu PsF 58 I/P Conversion Progressive Interlace Image Priority Speed Priority Film Cadence4 2-2 2-3 2-3-3-2 Off Setting Options (Bold: factory default) Defines how the PsF signal is displayed. [Progressive]: Interpolates giving preference to image quality by detecting paired
  • Canon DP-V1710 | User Manual - Page 59
    OSD Menu Audio Settings This menu is used to set audio output from the headphone terminal. Sub Menu SDI Group CH L (SDI) CH R (SDI) CH L (HDMI) CH R (HDMI) Volume Audio Switch CH1-CH8 CH9-CH16 [SDI Group] When [CH1-CH8] CH1 to CH8 (CH1) When [CH9-CH16] CH9 to CH16 (CH9) [SDI Group] When [CH1-CH8]
  • Canon DP-V1710 | User Manual - Page 60
    OSD Menu Marker Settings This menu is used to configure various markers. Sub Menu 60 Marker Preset Aspect Marker1 Setting Options (Bold: factory default) Marker 1 to 5 Off Customizes markers which are assigned to markers 1 to 5. [Aspect Marker] displays a range in accordance with the specified
  • Canon DP-V1710 | User Manual - Page 61
    OSD Menu Sub Menu Setting Options (Bold: factory default) Line Color White, Red, Green, Sets the color of the aspect marker line. Blue, Yellow, Cyan, Magenta 61 Line Brightness High Sets the brightness of the aspect marker line. Low H Position -65 to 65 (0) Changes horizontal position
  • Canon DP-V1710 | User Manual - Page 62
    OSD Menu Sub Menu Shape 62 Box Bracket Enclosure Setting Options (Bold: factory default) Sets the area shape of the safety zone marker. [Box]: [Bracket]: [Enclosure]: Line Width Line Color Line Brightness H Position V Position Area Marker1 Thick Normal Thin Sets the width of the safety zone
  • Canon DP-V1710 | User Manual - Page 63
    OSD Menu Sub Menu Setting Options (Bold: factory default) Height (dot) 10 to 2160 (120) Sets the height of the rectangle. (in increments of 2) Mask Black Switches the mask color (in the marker). Half 63 Off Line On, Off When [Mask] [Black] or [Half] Turns On/Off the outlines of the
  • Canon DP-V1710 | User Manual - Page 64
    OSD Menu Sub Menu Line Width 64 Line Color Line Brightness Thick Normal Thin White, Red, Green, Blue, Yellow, Cyan, Magenta High Low Setting Options (Bold: factory default) Sets the width of the grid marker line. Sets the color of the grid marker line. Sets the brightness of the grid marker line.
  • Canon DP-V1710 | User Manual - Page 65
    OSD Menu Function Settings This menu is used to set functions to link with Cinema EOS cameras and video assistance functions. Sub Menu Peaking1 Enable Monochrome Frequency Range Color False Color2 Setting Options (Bold: factory default) 65 Customizes peakings which are assigned to Peaking 1 or
  • Canon DP-V1710 | User Manual - Page 66
    Log Canon Log 2 Canon Log 3 SMPTE ST 2084 Sets the scale of the wave form monitor. [Automatic]: Sets in accordance with the gamma settings. Guide 1 to 255 A guide is displayed at the specified position. [Guide] is not displayed when [255] is selected. Standard Level High 190 to 255 Sets the
  • Canon DP-V1710 | User Manual - Page 67
    OSD Menu Sub Menu Vector Scope6 Setting Options (Bold: factory default) Configures various settings for the vector scope. Vector scope displays the intensity of color signals and hue with the horizontal axis showing the color difference signal Cb and the vertical line showing Cr. 67 (Cb, Cr) = (
  • Canon DP-V1710 | User Manual - Page 68
    Frame Hold Capture Source Playback File10 Finish Playback File Various Function Monochrome Blue Only11 Red Off Green Off Blue Off Banner Function Guide Setting Options (Bold: factory default) White, Gray (20%), Black, Red, Green, Blue, Ramp, 5 Step, Color Bars, PLUGE, Off Sets the test pattern
  • Canon DP-V1710 | User Manual - Page 69
    default) Camera Link Sets the functions to link with Cinema EOS cameras and ARRI cinema cameras. Automatic Adjustment (CINEMA EOS) When [Picture Mode] [Canon Log] Sets whether or not to link to the camera's image quality setting (when [SG-SDI RAW] is selected for 69 [Input Configuration] only
  • Canon DP-V1710 | User Manual - Page 70
    DP-V1710 or PC, color may not be played back precisely. 11 When [CDL/User LUT] is set to [User LUT], [Blue Only] cannot be selected. 12 This cannot be displayed when [Marker Preset] is [Off]. 13 • This can be operated in [On] with REC signals supported by this function (Cinema EOS cameras, Canon
  • Canon DP-V1710 | User Manual - Page 71
    ■■Parameter of Cinema EOS cameras and DP-V1710 Cinema EOS cameras DP-V1710 Color Space Gamma Color Gamut Gamma Color Temperature BT.709 Canon Log ITU-R BT.709 Canon Log D65 BT.2020 ITU-R BT.2020 D65 Cinema Cinema Gamut to 709 D65 Gamut Cinema Gamut to 2020 D65 Cinema Gamut to
  • Canon DP-V1710 | User Manual - Page 72
    [Automatic]: Configures an IP address automatically with DHCP/Auto IP. [Manual]: Configure an IP address and subnet mask manually. Display 192.168.0.1 Subnet Mask 255.255.255.0 In Monitor Display The video display supports Television Systems Ltd.'s "TSL UMD Protocol Ver. 5.0". You can operate
  • Canon DP-V1710 | User Manual - Page 73
    when silent operation is needed. Set this in advance to stop the fan manually or to stop the fan ( 69) by linking with the camera's REC HDR signals of a luminance higher than that of the display main unit are not supported. [Compatible 2]: Set this option when video is not played correctly in [Normal
  • Canon DP-V1710 | User Manual - Page 74
    3 seconds. When a password has been set, enter the password and select [OK]. This function is used to update the video display firmware. Refer to the Canon website for detailed information. Sets the export/import main menu settings. USB User 1 to User 3 Select the export destination. [USB]: Export
  • Canon DP-V1710 | User Manual - Page 75
    data cannot be exported or imported to [User 1] to [User 3] under [Target]. • Data exported from this product may not be imported to products of which firmware version is earlier than the version of this product. To import data, update the
  • Canon DP-V1710 | User Manual - Page 76
    ACESproxy Gamut LUT 1 to Gamut LUT 8 Item Gamma CDL/User LUT Channel Settings Options 1.0 2.2 2.35 2.4 2.6 ITU-R BT.1886 Canon Log Canon Log (HDR) Canon Log 2 Canon Log 2 (HDR) Canon Log 3 Canon Log 3 (HDR) SMPTE ST 2084 Hybrid Log-Gamma Y Hybrid Log-Gamma RGB Gamma LUT 1 to Gamma LUT 8 CDL Preset
  • Canon DP-V1710 | User Manual - Page 77
    OSD Menu Item Display Settings Audio Settings Marker Settings3 Options Screen Scalling Scaling Method Zoom Preset Zoom 1 Zoom 2 Zoom 3 Frame Hold SDI Group CH L CH R Volume Audio Switch Marker Preset Marker 1 Marker 2 Marker 3 Marker 4 Marker 5 Aspect Marker Safety Zoon Marker 1 Safety Zoon Marker
  • Canon DP-V1710 | User Manual - Page 78
    is displayed. Select a signal with the jog dial according to the guide at top right corner of the menu. When signal 78 information has and network information. Item Display Serial No. Firmware Ver. Usage Time* IP Address Subnet Mask MAC Address DP-V1710 000000000000 1.0 5 h 192.168.0.1 255.255
  • Canon DP-V1710 | User Manual - Page 79
    Main specifications/Performance Panel Panel Type Screen Size Aspect Ratio Resolution Active Display Area Pixel Pitch Image quality Brightness (Standard) View Angle (Up, Down, Left, Right) Surface Treatment General Backlight Type Power Power consumption Environmental Conditions Operating Storage
  • Canon DP-V1710 | User Manual - Page 80
    Contents protection standard: HDCP 2.2 4 (1 pass-thru systems) 1 stereo mini jack, Supported impedance: 32 Ω to 64 Ω 1 USB A receptacle terminal Universal Serial Bus Specification excepted. The information in this manual is verified as of December 2016. It is subject to change without notice.
  • Canon DP-V1710 | User Manual - Page 81
    Dimensions Front 435 (17.1) 408.5 (16.1) Main specifications/Performance 81 241.6 (9.5) 308 (12.1) 329 (13.0) 356 (14.0) 336 (13.2) Rear 137 (5.4) 100 (3.9) 4-M4 Depth 6 (0.2) (Max.) 144.4 (5.7) 100 (3.9) Side 26 (1.0) 91 (3.6) 61 (2.4) 51.5 (2.0) 154 (6.1) 4-M4 Depth 7 (0.3) (Max.)
  • Canon DP-V1710 | User Manual - Page 82
    Appendix 82 Supported Signal Format SDI Transmission method Signal format HD-SDI 1280x720P 59.94/60.00 Hz 1280x720P 50.00 Hz 1280x720P 29.97/30.00 Hz
  • Canon DP-V1710 | User Manual - Page 83
    Appendix Transmission method Signal format Color format Color depth Standards 3G-SDI (Level A) 1920x1080i 59.94/60.00 Hz 4:4:4 RGB 4:4:4 YCbCr 12-bit/10-bit SMPTE 425-1 SMPTE 274M 4:2:2 YCbCr 12-bit 83 1920x1080P 50.00 Hz 4:2:2 YCbCr 10-bit 1920x1080i 50.00 Hz 4:4:4 RGB 4:4:4 YCbCr
  • Canon DP-V1710 | User Manual - Page 84
    Appendix Transmission method Signal format 3G-SDI (Level A) 2048x1080i 50.00 Hz 84 2048x1080P 47.95/48.00 Hz 2048x1080P 29.97/30.00 Hz 2048x1080PsF 29.97/30.00 Hz 2048x1080P 25.00 Hz 2048x1080PsF 25.00 Hz 2048x1080P 23.98/24.00 Hz 2048x1080PsF 23.98/24.00 Hz Color format 4:4:4 RGB 4:4:4
  • Canon DP-V1710 | User Manual - Page 85
    Appendix Transmission method Signal format Color format Color depth Standards 3G-SDI (Level B) 1920x1080P 59.94/60.00 Hz 1920x1080i 59.94/60.00 Hz 4:2:2 YCbCr 4:4:4 RGB 4:4:4 YCbCr 4:2:2 YCbCr 10-bit SMPTE 425-1 SMPTE 372 12-bit/10-bit SMPTE 274M 85 12-bit 1920x1080P 50.00 Hz 4:2:2
  • Canon DP-V1710 | User Manual - Page 86
    Appendix Transmission method Signal format 3G-SDI (Level B) 2048x1080P 47.95/48.00 Hz 86 2048x1080P 29.97/30.00 Hz 2048x1080PsF 29.97/30.00 Hz 2048x1080P 25.00 Hz 2048x1080PsF 25.00 Hz 2048x1080P 23.98/24.00 Hz Color format 4:2:2 YCbCr 4:4:4 RGB 4:4:4 X'Y'Z' 4:4:4 YCbCr 4:2:2 YCbCr 4:4:4 RGB
  • Canon DP-V1710 | User Manual - Page 87
    Appendix Transmission method Signal format Color format Color depth Standards 3G-SDI (Level B) 2048x1080PsF 23.98/24.00 Hz 4:4:4 RGB 4:4:4 X'Y'Z' 12-bit/10-bit SMPTE 425-1 12-bit SMPTE 372 SMPTE 428-9 SMPTE 428-19 87 SMPTE 2048-2 4:4:4 YCbCr 4:2:2 YCbCr 12-bit/10-bit 12-bit SMPTE
  • Canon DP-V1710 | User Manual - Page 88
    Appendix Transmission method Signal format Dual Link 3G-SDI Square Division (Level B) 88 3840x2160P 29.97/30 Hz 3840x2160PsF 29.97/30 Hz 3840x2160P 25 Hz 3840x2160PsF 25 Hz 3840x2160P 23.98/24 Hz 3840x2160PsF 23.98/24 Hz 4096x2160P 29.97/30 Hz 4096x2160PsF 29.97/30 Hz 4096x2160P 25 Hz
  • Canon DP-V1710 | User Manual - Page 89
    Appendix Transmission method Signal format Color format Color depth Standards Quad Link 3G-SDI (Level A) 3840x2160P 59.94/60.00 Hz 3840x2160i 59.94/60.00 Hz 4:2:2 YCbCr 4:4:4 RGB 4:4:4 YCbCr 4:2:2 YCbCr 10-bit 12-bit/10-bit SMPTE 425-1 SMPTE 274M 89 12-bit 3840x2160P 50.00 Hz 4:2:2
  • Canon DP-V1710 | User Manual - Page 90
    Appendix Transmission method Signal format Quad Link 3G-SDI (Level A) 4096x2160P 50.00 Hz 90 4096x2160i 50.00 Hz 4096x2160P 47.95/48.00 Hz 4096x2160P 29.97/30.00 Hz 4096x2160PsF 29.97/30.00 Hz 4096x2160P 25.00 Hz 4096x2160PsF 25.00 Hz 4096x2160P 23.98/24.00 Hz 4096x2160PsF 23.98/24.00 Hz
  • Canon DP-V1710 | User Manual - Page 91
    Appendix Transmission method Signal format Quad Link 3G-SDI 2 Sample Interleave (Level A) 3840x2160P 59.94/60 Hz 3840x2160P 50 Hz 3840x2160P 29.97/30 Hz 3840x2160P 25 Hz 3840x2160P 23.98/24 Hz 4096x2160P 59.94/60 Hz 4096x2160P 50 Hz 4096x2160P 47.95/48 Hz 4096x2160P 29.97/30 Hz 4096x2160P 25
  • Canon DP-V1710 | User Manual - Page 92
    Appendix Transmission method Signal format Quad Link 3G-SDI (Level B) 3840x2160i 50.00 Hz 92 3840x2160P 29.97/30.00 Hz 3840x2160PsF 29.97/30.00 Hz 3840x2160P 25.00 Hz 3840x2160PsF 25.00 Hz 3840x2160P 23.98/24.00 Hz 3840x2160PsF 23.98/24.00 Hz 4096x2160P 59.94/60.00 Hz 4096x2160i 59.94/60
  • Canon DP-V1710 | User Manual - Page 93
    Appendix Transmission method Signal format Quad Link 3G-SDI (Level B) 4096x2160P 29.97/30.00 Hz Color format Color depth Standards 4:4:4 RGB 4:4:4 X'Y'Z' 12-bit/10-bit SMPTE 425-1 SMPTE 372 12-bit SMPTE 428-9 SMPTE 428-19 93 SMPTE 2048-2 4:4:4 YCbCr 4:2:2 YCbCr 12-bit/10-bit 12-bit
  • Canon DP-V1710 | User Manual - Page 94
    Appendix Transmission method Signal format Quad Link 3G-SDI (Level B) 4096x2160PsF 23.98/24.00 Hz 94 Quad Link 3G-SDI 2 Sample Interleave (Level B) 3840x2160P 59.94/60 Hz 3840x2160P 50 Hz 3840x2160P 29.97/30 Hz 3840x2160P 25 Hz 3840x2160P 23.98/24 Hz 4096x2160P 59.94/60 Hz 4096x2160P 50 Hz
  • Canon DP-V1710 | User Manual - Page 95
    RAW Signal format 3840x2160P 59.94 Hz, 50.00 Hz, 29.97 Hz, 25.00 Hz, 24.00 Hz, 23.98 Hz 4096x2160P 59.94 Hz, 50.00 Hz, 29.97 Hz, 25.00 Hz, 24.00 Hz, 23.98 Hz HDMI Signal format 640x480P 59.94/60.00 Hz 800x600P 60.00 Hz 1024x768P 60.00 Hz 720x480P 59.94/60.00 Hz 720x576P 50.00 Hz 1280x720P 59.94/
  • Canon DP-V1710 | User Manual - Page 96
    Appendix Image/Frame Display SDI 96 1280x720 1920x1080 2048x1080 3840x2160 Signal system 23.98/24.00 25.00 29.97/30.00 50.00 59.94/60.00 50.00 59.94/60.00 23.98/24.00 25.00 29.97/30.00 23.98/24.00 25.00 29.97/30.00 50.00 59.94/60.00 50.00 59.94/60.00 23.98/24.00 25.00 29.97/30.00 23.98/24.00 25.
  • Canon DP-V1710 | User Manual - Page 97
    4096x2160 Signal system 50.00 59.94/60.00 23.98/24.00 25.00 29.97/30.00 23.98/24.00 25.00 29.97/30.00 47.95/48.00 50.00 59.94/60.00 Display Method i 50.00 P i 59.94/60.00 P PsF 47.96/48.00 P* PsF 50.00 P* PsF 59.94/60.00 P* P 47.96/48.00 P* P 50.00 P* P 59.94/60.00 P* P
  • Canon DP-V1710 | User Manual - Page 98
    Appendix HDMI 640x480 98 800x600 720x480 720x576 1024x768 1280x720 1280x720 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 2048x1080 2048x1080 2048x1080 2048x1080 2048x1080 3840x2160 3840x2160 3840x2160 3840x2160 3840x2160 4096x2160 4096x2160 4096x2160 4096x2160 4096x2160
  • Canon DP-V1710 | User Manual - Page 99
    Error Messages Message Description and Action 99 Calibration Failed to initialize the external sensor. See CA-310 and CA-210 instruction manual. Calibration error. • Check the installation and connection of the external sensor and retry ( 28). • Perform matrix calibration of CA-310 and CA-
  • Canon DP-V1710 | User Manual - Page 100
    memory is not connected. Unsupported USB memory. Description and Action The USB memory may be defective on the power. If the message persists, contact Canon Customer Center. The temperature inside the main unit Unsupported video signal is input. Check the supported signal format ( 82). Check the [
  • Canon DP-V1710 | User Manual - Page 101
    DC power supply Message Low Voltage. Low Voltage, Turn off power. Invalid Voltage, Turn off power. Error Messages Description and Action The battery charge level drops if using the battery. If you use another power source, check the input voltage of the DC power
  • Canon DP-V1710 | User Manual - Page 102
    Troubleshooting type of the CINEMA EOS SYSTEM camera. Refer to the Canon - website for a list of supported products. There is a blank area when set to Quad is a limit on the service life of LCD backlight. If the screen becomes dark or starts flickering, contact Canon Customer Center. Burn-in image
  • Canon DP-V1710 | User Manual - Page 103
    Troubleshooting Symptom Cause and Action There is an unlit or red, blue, green, or • LCD display is made of very high precision technology. It has effective
  • Canon DP-V1710 | User Manual - Page 104
    modules from Canon or third parties. Software Developed by Canon and Free Software Software developed or created by Canon and accompanying DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
  • Canon DP-V1710 | User Manual - Page 105
    Software Used in This Product ■libxml License Copyright (C) 1998-2003 Daniel Veillard. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction
  • Canon DP-V1710 | User Manual - Page 106
    Test Pattern 68 Brightness 40 C Calibration 28, 46 Camera Information 69 Camera Link 69 Canon Log, CanonLog 2, Canon Log 3 40, 41 CDL Export/CDL Import 31 CDL/User LUT Bypass 44 Fan Control 73 Film Cadence 58 Firmware Ver 78 Format 54 Frame Hold 57 Function/Channel Button 72 Function
  • Canon DP-V1710 | User Manual - Page 107
    Function Settings 65 G Gain R/G/B 40 Gamma 41 Gamma LUT 41 Gamut LUT 41 Gray (20%) (Test Pattern 68 Green Off 68 Green (Test Pattern 68 Grid Marker 63 H HDMI 12, 21 HDR Range 42 HDR/SDR View 46 HD-SDI 12, 20 Hide OSD 77 Hybrid Log-Gamma System 46 Hybrid Log-Gamma Y/RGB 42 I Image
  • Canon DP-V1710 | User Manual - Page 108
    108 Saturation 44 Scaling Method 57 Screen Capture 68 Screen Scaling 56 Select Channel 53 Select Input Signal 53 Separator 55 Serial No 78 Settings 31, 74 Shape Trace 57 Sharpness 40 Signal Information 78 Single Input 53 Slope 44 SMPTE-C 40 Speed Priority 58 Square Division 54
  • Canon DP-V1710 | User Manual - Page 109
    or that cause abnormally frequent service calls or service problems; D. If defects or damages are caused by service other than Canon USA's factory service centers or authorized service facilities; E. Any internal modification to product hardware or firmware; F. Any maintenance of the Equipment
  • Canon DP-V1710 | User Manual - Page 110
    AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU). CANON USA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA
  • Canon DP-V1710 | User Manual - Page 111
    or that cause abnormally frequent service calls or service problems D. If defects or damages are caused by service other than Canon Canada's factory service centers or authorized service facilities; E. Any internal modification to product hardware or firmware; F. Any maintenance of the Equipment
  • Canon DP-V1710 | User Manual - Page 112
    AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU). CANON CANADA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA
  • Canon DP-V1710 | User Manual - Page 113
    .mx 52 (55) 5249-4905 UNITED KINGDOM www.canon.co.uk Canon UK Ltd CCI Service Centre, Unit 130, Centennial Park, Borehamwood, Hertfordshire, WD6 3SE 0844-369-0100 USA CANON U.S.A., INC. http://pro.usa.canon.com http://pro.usa.canon.com/support (855) 4K-CANON (855-452-2666) (USA only) http://www
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
PUB. MIE-0014-000
•
Before use, be sure to read this guide, including the safety and handling precautions.
•
Reading this guide will help you learn to use the video display properly.
•
Store this guide safely so that you can use it in the future.
English
Instruction Manual
Video Display