Canon DP-V1710 User Manual - Page 18
Mounting the Main Unit on a 19 Inch Rack: RB‑02 Rack Mount Bracket (sold separately)
View all Canon DP-V1710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installation/Connection Mounting the Main Unit on a 19 Inch Rack: RB‑02 Rack Mount Bracket (sold separately) 18 This video display is compatible with a 19-inch rack mount (7U / complies with EIA standards). The video display can be attached to a 19-inch rack using the separately-sold RB-02 Rack Mount Bracket. The angle can be selected depending on how it is attached (-15/-6/6/15 degrees). Remove the carrying handle and stand before starting work ( 13, 15). The Rack Mount Bracket is supplied with the SW-04 and SW-05 screws for attaching it. Please also see the instruction manual for the RB-02 Rack Mount Bracket. CAUTION • For safety, make sure to perform this step with at least two people. • When the video display is placed on a rack and ventilation around it is blocked by equipment placed above or below or in a surrounding area, the operating temperature may increase, causing a failure or overheating. In order to maintain the operating temperature condition of the video display (0 ˚C to 40 ˚C), make space of at least 1U (4.4 cm) above and below and at least 4 cm space from its back. Make sufficient space from peripheral equipment, secure vents, or install a ventilation fan. • Ensure that you do not touch or damage the screen during this process. • Make sure that the main unit does not fall during installation/removal. 1 Attaching a Rack Mount Bracket to the Video Display. • Use the SW-04 screws in two locations each on the left and right. Side view Rack Mount Bracket Screw SW-04 Same on the other side