Canon DP-V1710 User Manual - Page 47
ITU-R BT.709, Cancel, Copy the Picture Mode settings.
![]() |
View all Canon DP-V1710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
OSD Menu Sub Menu Color Gamut Gamma Start Copy Picture Mode10 Picture Mode Execute Picture Mode Name Anchor Adjustment Reset Setting Options (Bold: factory default) SMPTE-C Sets the color gamut. EBU ITU-R BT.709 ITU-R BT.2020 47 Adobe RGB DCI-P3 2.2, 2.35, 2.4, 2.6, ITU-R BT.1886 Sets the target gamma. Performes calibration. When [Picture Mode] [User 1] to [User 7] Copy the Picture Mode settings. SMPTE-C EBU ITU-R BT.709 ITU-R BT.2020 Adobe RGB DCI-P3 User 1 to User 7 Select the Picture Mode. [User 1] to [User 7]: Select from other than the currently set mode. Performs copy. You can change the name of [User 1] to [User 7] within 16 characters including alphabetical characters, numbers, and symbols. OK Cancel Temporarily saves parameters for adjusting [Contrast], [Brightness], [Chroma], and [Sharpness] and recover the values (anchor point setting). OK Cancel [OK]: Performs anchor point setting. [Cancel]: Returns to the previous screen without setting anchor point. Return [Picture Mode] to factory default. Note that in [User 1] to [User 7] mode where you are performing calibration, the setting returns to the value after calibration instead of the factory default. When selected, the message [Reset Adjustment settings to defaults?] appears. [OK]: Performs reset. [Cancel]: Returns to the previous screen without resetting.
![](/manual_guide/products/canon-dpv1710-user-manual-11d03c0/47.png)