Canon DP-V1710 User Manual - Page 73
Normal] or [Compatible 1]. [4K50.00P/60.00P] and HDR signals are
View all Canon DP-V1710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
OSD Menu Sub Menu Remote(GPI)2 Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Setting Options (Bold: factory default) You can operate the video display using an external controller such as a switcher that has been connected to the REMOTE terminal. Operates while the GND (No. 8 Pin) is connected to No.s 1 to 7, shorting them. 73 CH1 to CH5 Assigns functions in each GPI pin. ( 34) Aspect Marker3 • Combining [Tally Green] and [Tally Red] makes [Tally Amber]. Safety Zone Marker 1/23 Area Marker3 Center Marker3 Grid Marker3 Time Code Wave Form Monitor Vector Scope Audio Level Meter Tally Green Tally Red Power On4 - (Not set) Display Name Sets the name of the main unit. You can input up to 16 alphanumeric characters. Power Indicator Brightness Off 1 to 5 (3) Adjusts the brightness of the power indicator on the main unit. The greater the number is, the greater the brightness. Display Button LED On, Off Sets the F buttons and the lamp on the face. Fan Settings Sets the operation of internal fan. Fan Control On, Off Fan noise can be eliminated when the main unit is used during shooting or when silent operation is needed. Set this in advance to stop the fan manually or to stop the fan ( 69) by linking with the camera's REC signal. When this is set to [On], the mode changes so that the fan can be stopped. Fan Stop5 On, Off If [Fan Stop] is set to [On] and when [Fan Control] is set to [On], the fan can be stopped. At room temperature (25 °C), the fan remains off for approximately one minute (about 10 minutes when using DC power). The fan operates at a faster speed than usual before and after the fan is stopped to lower the internal temperature. Compatible Settings Sets the connection compatibility with HDMI equipment. HDMI Normal Compatible 1 Compatible 2 [Normal]: All formats are supported. [Compatible 1]: Set this option when video is not played correctly in [Normal]. HDR signals of a luminance higher than that of the display main unit are not supported. [Compatible 2]: Set this option when video is not played correctly in [Normal] or [Compatible 1]. [4K50.00P/60.00P] and HDR signals are not supported.