Canon DP-V1710 User Manual - Page 12
Back face of the main unit, 6G/3G/HD-SDI output terminal - firmware
![]() |
View all Canon DP-V1710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Nomenclature Back face of the main unit 12 As Ad Sq Al Af Ag Ah AjAk Ag As HDMI input terminal ( 21) Ad 6G/3G/HD-SDI input terminal ( 20) Af 6G/3G/HD-SDI output terminal For passing through output corresponding to Ad. ⑮ Rear stand ( 15) Ah REMOTE terminal ( 34) For connecting remote control devices. Aj LAN (10/100 BASE) terminal ( 35) For connecting a Display Controller CL-01 (provided with the DP-V3010) and external control device. Ak Cord clamp mounting hole ( 23) Al AC power input terminal ( 22) Sq DC power input terminal ( 22) CAUTION • When connecting an external sensor for calibration to the USB port, the USB cable length must not exceed 3 m (9.8 ft.). Otherwise, communication error may occur and correct calibration may not be possible. • For safety, do not connect any connector that may have excessive voltage to the terminal of the video display when connecting peripheral devices. Note • About USB Memory -- Both FAT16 and FAT32 USB memory devices are supported. -- Proper operation cannot be guaranteed for all USB memories. -- It may take 10 seconds or more for the USB memory to be recognized. If the function to save data on a USB memory is executed during recognition, the message [Detecting USB memory] is displayed. • When using a Display Controller CL-01 (provided with the DP-V3010) with the main unit, update the controller firmware version to 4.19.0 or later.
![](/manual_guide/products/canon-dpv1710-user-manual-11d03c0/12.png)