Canon DP-V1710 User Manual - Page 69
ITU-R BT.2020, Automatic, Gamma], [Color Temperature], and [Color Range] are all set to [On].
View all Canon DP-V1710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
OSD Menu Sub Menu Setting Options (Bold: factory default) Camera Link Sets the functions to link with Cinema EOS cameras and ARRI cinema cameras. Automatic Adjustment (CINEMA EOS) When [Picture Mode] [Canon Log] Sets whether or not to link to the camera's image quality setting (when [SG-SDI RAW] is selected for 69 [Input Configuration] only). On, Off Refer to the Setting Values Correspondence Table when [Color Gamut/ Gamma], [Color Temperature], and [Color Range] are all set to [On]. ( 71) Color Gamut/Gamma On, Off The image quality of the display corresponds to the gamma and color gamut of the camera. Color Temperature On, Off The image quality of the display corresponds to the color temperature of the camera. Color Range On, Off The image quality of the display corresponds to the range of the camera. Display Color Gamut ITU-R BT.709 ITU-R BT.2020 DCI-P3 Sets the color gamut shown on the display when the camera's [Color Space] is set to [Cinema Gamut] or [DCI-P3+]. Automatic Adjustment (ARRI) When [Picture Mode] [User 1] to [User 7] Sets whether or not to link to the camera's image quality setting. On, Off When [CDL/User LUT] [User LUT] Refer to the Setting Values Correspondence Table when [ARRI LUT 709] or [ARRI LUT 2020] are selected. ( 71) User LUT/Color Gamut On, Off The image quality of the display corresponds to the settings of [User LUT] and color gamut of the camera. Color Range Area Marker12 Fan13 On, Off ARRI Frame line 1A ARRI Frame line 1B Off On, Off The image quality of the display corresponds to the range of the camera. When an ARRI cinema camera is connected to this device, the [H Position], [V Position], [Width], and [Height] for the [Area Marker] change depending on the meta information. Sets whether or not to stop the fan by linking with the camera's REC signal. When [Fan Control] under [System Settings] is set to [On], the mode changes so that the fan can be stopped, and when [Fan] is set to [On], the fan can be stopped by linking with the camera's REC signal. At room temperature (25 °C), the fan remains off for approximately one minute (about 10 minutes when using DC power). The fan operates at a faster speed than usual before and after the fan is stopped to lower the internal temperature. Camera Information Automatic On Off Sets conditions to display camera information. [Automatic]: Camera information is displayed for 4 seconds when the information has changed. [On]: Camera information is always displayed. [Off]: Camera information is not displayed. 1 [Peaking] cannot be displayed during the execution of [Playback File] under [Screen Capture]. 2 [False Color] cannot be displayed during the execution of [Playback File] under [Screen Capture]. 3 [Time Code] cannot be displayed in the following cases: -- When [Frame Hold] is [On] -- During the execution of [Playback File] under [Screen Capture] -- When the location selected for [Time Code] and [Audio Level Meter] to be displayed is the same -- When [Test Pattern] is displayed 4 This setting becomes invalid when HDMI signal is input and is fixed to [VITC]. 5 This setting becomes invalid in the [Multi View (Dual)] display.