Canon DP-V1710 User Manual - Page 50

Color Range to be Set, Canon Log 3 HDR

Get Canon DP-V1710 PDF manuals and user guides View all Canon DP-V1710 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

OSD Menu 6 • Setting is disabled when [ACESproxy] is selected for [Picture Mode] or [ACESproxy] is selected for [Color Gamut]. • Operations when [Automatic] is selected are described below. -- When HDMI is selected, [Full (0-255)] or [Limited 1 (16-235)] is set automatically depending on HDMI signal information. -- When SDI is selected, the setting is configured according to the settings for [Picture Mode], [Color Gamut], and [Gamma]. 50 Setting Options Color Range to be Set Picture Mode DCI-P3 Color Gamut Gamma DCI-P3 Cinema Gamut to DCI DCI-P3+ to DCI Canon Log (HDR) Canon Log 2 (HDR) Canon Log 3 (HDR) SMPTE ST 2084 Canon Log Canon Log 2 Canon Log 3 Full (0-255) Limited 2 (16-255) Other than the above Limited 1 (16-235) 7 • When [User LUT] is selected, all [CDL] items, [Chroma], and [Blue Only] cannot be changed. • [ARRI LUT 709] can be selected when [Picture Mode] is set to [ITU-R BT.709] or [User 1] to [User 7]. • [ARRI LUT 2020] can be selected when [Picture Mode] is set to [ITU-R BT.2020] or [User 1] to [User 7]. 8 • Cannot be set when [Picture Mode] is selected in the right screen. • When the [Contrast] setting for the left screen is specified as [1000] or less, the luminance of the left and right screens is the same. 9 • Calibration cannot be executed when using DC power. • When [Luminance] is set to high brightness, it may be calibrated beyond the brightness adjustment range and set lower than the target value, depending on the [Color Temperature] setting. In that case, set the [Luminance] again. • Cannot be run in [Picture Mode] of the right screen in the [Multi View (Dual)] display. 10 In [Picture Mode] other than [User 1] to [User 7], the results of calibration performed at the factory are copied.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
OSD Menu
50
6
• Setting is disabled when [ACESproxy] is selected for [Picture Mode] or [ACESproxy] is selected for [Color Gamut].
• Operations when [Automatic] is selected are described below.
-
When HDMI is selected, [Full (0-255)] or [Limited 1 (16-235)] is set automatically depending on HDMI signal information.
-
When SDI is selected, the setting is configured according to the settings for [Picture Mode], [Color Gamut], and [Gamma].
Setting Options
Color Range to be Set
Picture Mode
DCI-P3
Full (0-255)
Color Gamut
DCI-P3
Cinema Gamut to DCI
DCI-P3+ to DCI
Gamma
Canon Log (HDR)
Canon Log 2 (HDR)
Canon Log 3 (HDR)
SMPTE ST 2084
Canon Log
Canon Log 2
Canon Log 3
Limited 2 (16-255)
Other than the above
Limited 1 (16-235)
7
• When [User LUT] is selected, all [CDL] items, [Chroma], and [Blue Only] cannot be changed.
• [ARRI LUT 709] can be selected when [Picture Mode] is set to [ITU-R BT.709] or [User 1] to [User 7].
• [ARRI LUT 2020] can be selected when [Picture Mode] is set to [ITU-R BT.2020] or [User 1] to [User 7].
8
• Cannot be set when [Picture Mode] is selected in the right screen.
• When the [Contrast] setting for the left screen is specified as [1000] or less, the luminance of the left and right screens is the same.
9
• Calibration cannot be executed when using DC power.
• When [Luminance] is set to high brightness, it may be calibrated beyond the brightness adjustment range and set lower than the target value,
depending on the [Color Temperature] setting. In that case, set the [Luminance] again.
• Cannot be run in [Picture Mode] of the right screen in the [Multi View (Dual)] display.
10
In [Picture Mode] other than [User 1] to [User 7], the results of calibration performed at the factory are copied.