Canon DP-V1711 Video Display Operation Guide - Page 113
Error Messages
View all Canon DP-V1711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Error Messages Message Description and Action Calibration Failed to initialize the external sensor. See CA-310 and CA-210 instruction manual. Calibration error. • Check the installation and connection of the external sensor and retry ( 10). • Perform matrix calibration of CA-310 and CA-210 ( 10). Calibration is completed. Set the [Luminance] in calibration again ( 37). (Brightness setting is lower than target brightness.) Failed to detect the external sensor. Please check the connection with the sensor. Correctly connect the external sensor to the USB port of this main unit. Network Communication error. IP address may be in conflict or there may be a network communication error. Check the network environment. Invalid IP Address. Enter the correct IP address. Invalid Subnet Mask. Enter the correct subnet mask. Display is not connected. Check that the Canon display to which you wish to export this video display's settings and this video display are correctly connected with a LAN cable. Various settings, CDL export The USB memory is full. Use another USB memory or delete the content of the memory. Failed to write file. The USB memory may be defective or protected. Check the USB memory. LUT, Various settings, (LUT Import) "LUT Type" is different. CDL import (CDL Import) "File Type" is different. Select the correct file format. Failed to read file. The USB memory may be defective or protected. Check the USB memory. Failed to import. There is an error in the file to be imported. Check the file. No import file. Check and ensure that the file has been saved to the USB memory or imported to [User 1] to [User 3]. 113