Canon DP-V1711 Video Display Operation Guide - Page 49
Multi View Dual]: Each of the images Inputs A/B or Inputs C/D from
![]() |
View all Canon DP-V1711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
OSD Menu Sub Menu Image Division Setting Options When [Input Configuration] [12-3G/HD-SDI] ( [3G/HD-SDI], [6G/3G/HD-SDI]) Sets the display method when using either [Quad Input] or [Dual Input]. Two division methods "Square Division" and "2 Sample Interleave" are supported for 4K video signals. 49 Automatic [Automatic]: Automatically determined based on payload and displayed. Square Division [Square Division]: Displays a signal transmitted over four inputs as a single 2 Sample Interleave image. [2 Sample Interleave]: Displays a signal transmitted divided into a 2K/HD [Select Input Signal] signal as a single image. When [Quad Input] [Multi View (Quad)]: Each of the images from the four inputs are shown in Multi View (Quad) four screens. When [Dual Input] [Dual Link 3G-SDI]: Displays a Dual Link 3G-SDI signal as a single image. Dual Link 3G-SDI [Multi View (Dual)]: Each of the images (Inputs A/B or Inputs C/D) from the Multi View (Dual) two inputs are shown in two screens. Link Order Automatic Off Select Input Signal: Quad Input, Image Division: Square Division • The combinations of video signal formats that can be displayed when using two screens or four screens in [Multi View (Quad)] or [Multi View (Dual)] are as follows: -- Resolution combinations: Same, or "4096x2160, 2048x1080", "3840x2160, 1920x1080" -- When using a frame rate and I/P/PsF combination that is one of "23.98P / 24P / 25P / 29.97P / 30P" "I (All) / PsF (All) / 47.95P / 48P / 50P / 59.94P / 60P" -- (Quad screen display only) For both left and right, when the top and bottom screen video signal frame rates and I/P/PsF are the same There may be periodical deterioration in the image when inputting signals with differing frame rates or I/P/PsF. • Two or four screens can be displayed with [Multi View (Quad)] or [Multi View (Dual)] selected only if the same image signal format is used. • When using [Multi View (Quad)] or [Multi View (Dual)]: For 2048×1080 images, the images are displayed in reduced size when [Screen Scaling] is set to [Automatic]. The left and right parts of the screen will be trimmed for display when anything other than [Automatic] is selected. Automatically detects and displays correct terminal order based on payload when using [2 Sample Interleave] or [Dual Link 3G-SDI].
![](/manual_guide/products/canon-dpv1711-video-display-operation-guide-57ee8f1/49.png)