Canon DP-V1711 Video Display Operation Guide - Page 20
Operating the video display using an external device [LAN terminal], In Monitor Display].
![]() |
View all Canon DP-V1711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Operating the Video Display Operating the video display using an external device [LAN terminal] The video display supports Television Systems Ltd.'s "TSL UMD Protocol Ver. 5.0". You can operate the video display using an external device connected to the LAN terminal and display characters and tally lights on the screen. There are 20 two tally lights, on the left and right. Up to 16 characters can be displayed. Tally display (left) Character display Tally display (right) 1 Connect an external control device to the LAN terminal. 2 Set [SCREEN] and [INDEX] to [0x0000] in the TSL Protocol settings. 3 Select [Network/IMD Settings] [In Monitor Display]. 4 Select [Control] [TSL Ver. 5.00]. • This will allow operation from an external control device, and display characters and tally lights. 5 Select [Position] [Top] or [Bottom]. • This sets the position where characters and tally lights will be displayed. Note • When [Multi View (Dual)] or [Multi View (Quad)] is displayed, set the [INDEX] setting to from [0x0001] to [0x0004]. • The port number for the controlling is fixed at "45000". • With [In Monitor Display] you can also display user-selected characters on the screen. ( 85)
![](/manual_guide/products/canon-dpv1711-video-display-operation-guide-57ee8f1/20.png)