Canon DP-V1711 Video Display Operation Guide - Page 67
Automatic, When [Gamma/EOTF]
View all Canon DP-V1711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
OSD Menu Sub Menu Display Type Select Line Scale Reference Line Reference Level All Line 1 to 2160 Automatic IRE SMPTE ST 2084 (PQ) Hybrid Log-Gamma Canon Log Canon Log 2 Canon Log 3 S-Log2 S-Log3 ARRI (Rec2100-PQ- 1K-100) ARRI (Rec2100-HLG- 1K-200) 4 to 1023 Automatic Manual Setting Options (Bold: factory default) Sets the display type. [Line]: The data for one line is displayed. 67 Selects the line to be displayed when [Line] is selected. Sets the scale of the wave form monitor. [Automatic]: Sets in accordance with the [Gamma/EOTF] and [Color Range] settings. • When [SMPTE ST 2084 (PQ)], [Canon Log], [Canon Log 2], or [Canon Log 3] is set (including [Automatic]): When [Gamma/EOTF] [SMPTE ST 2084 (PQ)], the item is displayed in accordance with the [Color Range] settings ([Limited 2] is set to [Limited] and [SDI Full (4-1019)] is set to [Full]). A guide is displayed at the specified position. [Reference Line] is not displayed when [1023] is selected. Sets the range of the reference level. Tints the outside of the range of the reference level. In the case of [Gamma/EOTF] corresponding to the HDR range, parts that exceed the HDR range are tinted. When [Color Range] [Limited], outside the limited range is tinted. Reference Level High Reference Level Low Color Y Cb Cr R G B Reference Level High Reference Level Low [Automatic]: Sets in accordance with the [Gamma/EOTF] and [Color Range] settings. 468 to 1023 Sets the reference display level (high). [Reference Level High] is not displayed when [1023] is selected. 0 to 468 Sets the reference display level (low). [Reference Level Low] is not displayed when [0] is selected. Sets the signals to be displayed and the color of signals exceeding the reference level. White Red Green Blue Yellow Cyan Magenta [Y], [Cb], [Cr], [R], [G], [B]: Selects the color of the selected signal. Default value of each signal is shown below. Y (White), Cb (White), Cr (White), R (Red), G (Green), B (Blue) [Reference Level High], [Reference Level Low]: Selects the color of the signal of the selected reference level. Default value of each reference level is shown below. Reference Level High (Magenta), Reference Level Low (Cyan)