Canon DP-V1711 Video Display Operation Guide - Page 85

TSL Ver. 5.00, Bottom, Automatic

Get Canon DP-V1711 PDF manuals and user guides View all Canon DP-V1711 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

OSD Menu Sub Menu Display Setting Link In Monitor Display Control Position Manual Display Type Manual String Adjustment Channel Adjustment/Channel Off Setting Options (Bold: factory default) Settings are linked between displays connected via LAN. This device's setting values are applied to all linked displays. * Before linking settings, check that the following conditions are met. a Turn on the power to this display and the display(s) to link with, and 85 check that they are all recognized on the network b Change the adjustment or channel and check that the other display(s) also change The devices and firmware versions that can be linked are shown below. DP-V3120: Version 1.0 or higher DP-V2410: Version 1.4 or higher DP-V2420 / DP-V2421: Version 1.3 or higher DP-V1710 / DP-V1711: Version 1.3 or higher DP-V2411: Version 1.2 or higher Displays not connected can be removed with the RESET button. • Operating the GPI* or the buttons on this display will reflect setting value changes in all. Linked operations using Payload ID, HDMI, Camera, etc. will not reflect the settings changes. (* ) • If a display model has functions with different menu settings or setting ranges, some settings will not be correctly exported (settings will not be changed, will revert to factory defaults, etc.) • In an environment where communication cannot be done properly, such as when the network environment is unstable or the bandwidth is insufficient, settings may not link properly. Only connect displays to be controlled to the LAN. If a Display Controller is connected, it may not operate properly ( ). • Up to 32 displays can have their settings linked. • [Bypass] (CDL/User LUT) under [Adjustment] [CDL/User LUT] is not linked. The video display supports Television Systems Ltd.'s "TSL UMD Protocol Ver. 5.0". You can operate the video display using an external device connected to the LAN terminal and display characters and tally lights on the screen. You can input any characters you like directly from this video display. ( 20) TSL Ver. 5.00 Manual Off Sets whether or not to receive the control signal from the connected device. [Manual]: Select to input the characters on this video display. Does not receive a control signal from the connected device. Top Bottom This sets whether the characters and tally lights will be displayed at the top or the bottom. Automatic Single Dual A,B, Dual C,D Quad A,B,C,D [Automatic]: Changes display in accordance with the Input Configuration. [Single]: Single-screen display. [Dual A,B], [Dual C,D]: Dual-screen display. [Quad A,B,C,D]: Quadruple-screen display. (Single) (Dual/Quad A) (Dual/Quad B) (Dual/Quad C) (Dual/Quad D) (Single Dual L) (Single Dual R) • When [Function Settings] [Signal Monitoring] [Control] is set to [On] then [Manual Display Type] is fixed to [Automatic]. When [Control] [Manual] Sets the characters to display for the selected [Manual String]. You can input up to 16 alphanumeric characters.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
OSD Menu
85
Sub Menu
Setting Options (Bold: factory default)
Display Setting Link
Adjustment
Channel
Adjustment/Channel
Off
Settings are linked between displays connected via LAN. This device's
setting values are applied to all linked displays.
* Before linking settings, check that the following conditions are met.
a
Turn on the power to this display and the display(s) to link with, and
check that they are all recognized on the network
b
Change the adjustment or channel and check that the other display(s)
also change
The devices and firmware versions that can be linked are shown below.
DP-V3120: Version 1.0 or higher
DP-V2410: Version 1.4 or higher
DP-V2420 / DP-V2421: Version 1.3 or higher
DP-V1710 / DP-V1711: Version 1.3 or higher
DP-V2411: Version 1.2 or higher
Displays not connected can be removed with the RESET button.
• Operating the GPI* or the buttons on this display will reflect setting value changes
in all. Linked operations using Payload ID, HDMI, Camera, etc. will not reflect the
settings changes. (*
)
• If a display model has functions with different menu settings or setting ranges,
some settings will not be correctly exported (settings will not be changed, will
revert to factory defaults, etc.)
• In an environment where communication cannot be done properly, such as when
the network environment is unstable or the bandwidth is insufficient, settings may
not link properly. Only connect displays to be controlled to the LAN. If a Display
Controller is connected, it may not operate properly (
).
• Up to 32 displays can have their settings linked.
• [Bypass] (CDL/User LUT) under [Adjustment]
[CDL/User LUT] is not linked.
In Monitor Display
The video display supports Television Systems Ltd.’s “TSL UMD Protocol Ver. 5.0”. You can operate
the video display using an external device connected to the LAN terminal and display characters and
tally lights on the screen. You can input any characters you like directly from this video display. (
20)
Control
TSL Ver. 5.00
Manual
Off
Sets whether or not to receive the control signal from the connected
device.
[Manual]: Select to input the characters on this video display. Does not
receive a control signal from the connected device.
Position
Top
Bottom
This sets whether the characters and tally lights will be displayed at the
top or the bottom.
Manual Display Type
Automatic
Single
Dual A,B, Dual C,D
Quad A,B,C,D
[Automatic]: Changes display in accordance with the Input Configuration.
[Single]: Single-screen display.
[Dual A,B], [Dual C,D]: Dual-screen display.
[Quad A,B,C,D]: Quadruple-screen display.
• When [Function Settings]
[Signal Monitoring]
[Control] is set to [On] then
[Manual Display Type] is fixed to [Automatic].
Manual String
(Single)
(Dual/Quad A)
(Dual/Quad B)
(Dual/Quad C)
(Dual/Quad D)
(Single Dual L)
(Single Dual R)
When [Control]
[Manual]
Sets the characters to display for the selected [Manual String]. You can
input up to 16 alphanumeric characters.