Canon Digital Rebel Software Instructions EOS DSD Ver.6 - Page 14
Installing the Software on Windows
![]() |
UPC - 013803028997
View all Canon Digital Rebel manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installing the Software on Windows ● Check that your PC complies with the system requirements for the software (A-8) on the SOLUTION DISK as you follow the installation procedure. ● For instructions for installing Photoshop Elements, refer to (W-8). Correct Installation Procedure ● Always install the software as described in the procedures below. 1 Start up your computer. 2 to 11 Install the software. ● Never connect the camera to your computer before you have installed the software. The software will not be installed correctly. ● Connect the camera to your computer for the first time in step 14. 12 Remove the CD. 13 Check the camera's communication mode. 14 to 15 Complete the installation. ● Once you connect the camera to your PC, installation is complete. ● If you were unable to successfully install the software using the procedure given in this guide, see "When You Have Problems with Installation" (W-7). ● If you connected the camera to your computer before installing the software, see "Troubleshooting" (W-82). 1 Start up your computer. ● Close any programs that are running. 2 Insert the CD (EOS DIGITAL SOLUTION DISK). \ The Installer panel appears. If the Installer Panel Does Not Appear Click the [Start] button s [My Computer]. (In other versions of Windows, double-click [My Computer] on the desktop) Then right-click the CD-ROM drive containing the CD, select [Open] from the menu that appears and double-click the [SETUP] icon. 3 Click [Software Installation]. \ The [Preparing to Install] window is displayed, and after a brief wait, the [Welcome to the InstallShield Wizard for Solution Disk] window is displayed. W-4
![](/manual_guide/products/canon-8861a003-software-instructions-eos-dsd-ver6-c55f052/14.png)