Canon Digital Rebel Software Instructions EOS DSD Ver.6 - Page 21

Connecting the Camera to Your Computer

Get Canon Digital Rebel - EOS 6.3MP Digital Rebel Camera PDF manuals and user guides
UPC - 013803028997
View all Canon Digital Rebel manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Connecting the Camera to Your Computer Connect the camera to your computer with the dedicated USB cable so that they can communicate. You can connect the camera while your computer is running. ● When you connect the camera to your computer, be sure to follow the procedure below. ● Never perform the following operations while the software installed from the SOLUTION DISK is running after connecting the camera to the computer as a communications error may occur. • Set the camera's power switch to . W • Open the CF card slot cover. • Disconnect the dedicated USB cable or remove the battery. • Disconnect the DC coupler (optional) or unplug the AC adapter (optional) or power cord. Before you perform the operations above, be sure to exit the software being used. 2 1 Plug the dedicated USB cable into the computer. ● Plug the cable into the USB port on the computer. ● The location of the port differs depending on your computer. Refer to the User's Manual for your computer for details. USB port Dedicated USB cable Getting Ready to Work with Images 2 Plug the dedicated USB cable into your camera. ● Open the cover and plug the cable connector into the < > terminal with the < > (USB) icon facing the front of the camera. DIGITAL terminal Dedicated USB cable 3 Set the camera's power switch to . \ The [EOS Kiss REBEL 300D] screen (event screen) and the [Scanner and Camera Wizard] dialog box appear. ● ZoomBrowser EX users should refer directly to "Chapter 6 Working with Images in ZoomBrowser EX". ● If you are not using ZoomBrowser EX, click the [Cancel] button, close all the open windows and refer to the Chapter that deals with your software. W-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
W-11
Getting Ready to Work with Images
W
2
Dedicated
USB cable
DIGITAL terminal
USB port
Dedicated
USB cable
Connect the camera to your computer with the dedicated USB cable so that they can
communicate. You can connect the camera while your computer is running.
●
When you connect the camera to your computer, be sure to follow the
procedure below.
●
Never perform the following operations while the software installed from the
SOLUTION DISK is running after connecting the camera to the computer as a
communications error may occur.
• Set the camera’s power switch to <OFF>.
• Open the CF card slot cover.
• Disconnect the dedicated USB cable or remove the battery.
• Disconnect the DC coupler (optional) or unplug the AC adapter (optional) or
power cord.
Before you perform the operations above, be sure to exit the software being
used.
1
Plug the dedicated USB cable into the computer.
●
Plug the cable into the USB port on
the computer.
●
The location of the port differs
depending on your computer. Refer
to the User’s Manual for your
computer for details.
Connecting the Camera to Your Computer
2
Plug the dedicated USB cable into your camera.
●
Open the cover and plug the cable
connector into the <
>
terminal with the <
> (USB)
icon facing the front of the camera.
3
Set the camera’s power switch to <ON>.
\
The [EOS Kiss REBEL 300D] screen (event screen) and the [Scanner and Camera
Wizard] dialog box appear.
●
ZoomBrowser EX users should refer directly to “Chapter 6 Working with Images in
ZoomBrowser EX”.
●
If you are not using ZoomBrowser EX, click the [Cancel] button, close all the open
windows and refer to the Chapter that deals with your software.