Canon Digital Rebel Software Instructions EOS DSD Ver.6 - Page 17
For Windows 2000, Me and 98 SE users, When You Have Problems with Installation
UPC - 013803028997
View all Canon Digital Rebel manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installing the Software on Windows For Windows 2000, Me and 98 SE users : ● When you set the camera's power switch to , a dialog box such as [Found New Hardware] or [Create driver information database] appears, depending on your operating system and computer system. If the display automatically clears at this point, W installation is complete. 1 Do not set the camera's power switch to until the [Found New Hardware] or [Create driver information database] message automatically disappears. Installing the Software on Your Computer ● When [EOS Kiss REBEL 300D] screen (event screen) and the [Scanner and Camera Wizard] dialog box appear, click the [Cancel] buttons and close all the open windows. ● When a window appears prompting you to restart your computer, restart the computer. When You Have Problems with Installation If you have problems with installation, check the items listed below. If the [Add New Hardware Wizard] ([Found New Hardware Wizard] in Windows 2000) dialog box appears while you are checking these items, click the [Cancel] button and disconnect the camera from your computer. Then re-install. (1) Does your computer comply with these requirements? ● PC with Windows XP, Windows 2000, Windows Me or Windows 98 SE preinstalled and a USB port as a standard feature. (A-8) (2) Is the camera connected correctly? ● See steps 13 and 14 for the connection method. (3) Are the camera and computer set up correctly for communication? ● Is the camera's power switch set to ? ● Check that the camera's communication mode is set to [Normal]. See step 12 for information on setting the communication mode. ● Even when the camera's power switch is set to , operation of the Auto power off function will automatically switch the camera off. To prevent this, set the Auto power off function to [Off]. (Refer to "Menu Settings" in the Instructions provided with your camera.) (4) Is there sufficient charge left in the camera battery? ● When the camera is connected to a computer, you should use the DC Coupler Kit (optional) so that you can continue using the camera regardless of battery level. If there are none of the problems listed above and you still cannot install successfully, see "Troubleshooting" (W-80) or "Uninstalling" (W-83) and then repeat the installation procedure from the beginning. W-7