Canon Digital Rebel Software Instructions EOS DSD Ver.6 - Page 155

Using RemoteCapture Approximate Transfer Times Transfer Time Approx. 59 sec. • The transfer times given here are only approximations. Actual transfer times vary widely depending on the images and the computer system. • Transfer times are based on Canon testing standards. (Time until the RAW image appears in the Save window when the [Release] button is pressed in the Shooting window and [Computer only] is specified using the following: OS: OS X (10.2); CPU: Power PC G4 700 MHz; RAM: 256 MB) • The times for images shot in JPEG format will be shorter than those shown above. M ● With the auto focusing, if the camera cannot focus, you cannot take shots. If you cannot take shots with the auto focusing, focus manually and then take a shot. ● The test-shot images taken with the camera held vertically are displayed in the normal (horizontal) orientation in the test-shot image display area. To rotate a downloaded image, select the image and then select [Rotate Saved Image 90 degree Right] or [Rotate Saved Image 90 degree Left] in the [Edit] menu. Timer Shooting 4 Use this function to specify the timer delay. Timer shooting shots are then taken after the specified number of seconds. 1 Select [Timer Shooting] in the [File] menu. \ The [Timer Shooting] dialog box appears. 2 Enter the timer setting (in seconds) and click the [Start] button. ● You can set a value between 2 and 30 seconds in 1-second increments. \ Timer shooting shots are taken after the specified number of seconds. Operating the Camera from Your Computer M-51