Canon EOS 5DS R Instruction Manual - Page 311

a Shooting Time-lapse Movies If the time it takes to record to the card exceeds the interval between shots due to the shooting functions set or card performance, some of the shots may not be taken with the set intervals. The captured images are not recorded as still photos. Even if you cancel the time-lapse movie shooting after only one shot is taken, it will be recorded as a movie file. If the card does not have enough free space to record the set number of shots, [Playback time] will be displayed in red. Although the camera can continue shooting, the shooting will stop when the card becomes full. If you connect the camera to a computer with the interface cable provided with the camera and use EOS Utility (EOS software), set [z5: Time-lapse movie] to [Disable]. If it is set to [Enable], the camera cannot communicate with the computer. During time-lapse movie shooting, the lens's Image Stabilizer will not operate. If the power switch is set to or the Live View shooting/Movie shooting switch is operated, time-lapse movie shooting will be terminated and the setting is switched to [Disable]. Even if a flash is used, it will not fire. Shooting-ready state of the time-lapse movie is canceled and the setting is switch to [Disable] with any of the following operations: • Selecting [z3: Dust Delete Data], [53: Sensor cleaning], [54: Clear all camera settings], or [54: zfirmware ver.]. • Selecting , , or shooting modes. When time-lapse movie shooting ends, the settings are cleared automatically, and you return to normal movie shooting. Note that if you have set the shutter speed slower than 1/60 sec. or faster than 1/4000 sec. for time-lapse movie shooting and the settings are automatically cleared, the shutter speed may be automatically changed to a speed within the settable range for normal movie shooting. If you start time-lapse movie shooting while the white (p.317) is displayed, the image quality of the time-lapse movie may deteriorate. 311