Canon EOS 5DS R Instruction Manual - Page 384

w Printing 4 Set the printing effects. Set them if necessary. If you do not need to set any printing effects, go to step 5. Contents displayed on the screen differ depending on the printer. Select the setting, then press . Select the desired printing effect, then press . If the icons are displayed brightly, you can also adjust the printing effects (p.386). Printing Effect Description EOff No automatic correction is applied. EOn Print with the printer's standard colors. The image's Exif data is used to make automatic corrections. EVIVID Print with higher saturation to produce more vivid blues and greens. ENR Image noise is reduced before printing. 0 B/W Prints in black-and-white with true blacks. 0 Cool tone Prints in black-and-white with cool, bluish blacks. 0 Warm tone Prints in black-and-white with warm, yellowish blacks. zNatural Prints the image in the actual colors and contrast. No automatic color adjustments are applied. zNatural M Printing characteristics are the same as the "Natural" setting. However, this setting enables finer printing adjustments than with "Natural." EDefault Printing differs depending on the printer. For details, refer to the printer's instruction manual. * When you change the printing effects, changes are reflected in the image displayed on the upper left of the screen. Note that the printed image may look slightly different from the displayed image, which is only an approximation. This also applies to [Brightness] and [Adjust levels] on page 386. 384