Canon Elura 20MC Elura 10 and Elura 20MC Instruction Manual - Page 122
Notes on Using the Batteries
View all Canon Elura 20MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Notes on Using the Batteries Charging and recording times E • These times vary - the safest policy is always to have 2 or 3 times as many battery packs as you think you will need. • You will get more recording time if you turn the camera off between shots, instead of leaving it in record pause mode. Battery pack BP-406 BP-412 (optional) Time needed for 1 hr. 10 min. 2 hr. full recharge Maximum Using the viewfinder: 55 min. 1 hr. 40 min. recording time Using the LCD screen: 45 min. 1 hr. 20 min. BP-422 (optional) 1 hr. 50 min. 3 hr. 20 min. 2 hr. 45 min. • Recording time will be shorter than usual at low temperatures. You can use the battery pack between 32° and 104°F (0° to 40°C), but it works best between 50° and 86°F (10° to 30°C). • If the battery pack starts to give you much less operating time than usual (at normal temperatures), it has reached the end of its life and must be replaced. • These figures show how long you can view playback with the LCD, after attaching a fully-charged battery pack. Playback time will be shortened at low temperatures. Battery pack BP-406 BP-412 BP-422 Playback time (using the LCD screen) 55 min. 1 hr. 20 min. 3 hr. 20 min. How much power is left? The indicator in the display shows you approximately how much charge the battery pack has left: Additional Information 122 • "CHANGE THE BATTERY PACK" appears in the display for 4 seconds when the power is completely exhausted. The empty battery mark then appears and starts to flash. The power indicator light also flashes. • The indicator is not constant - different levels will be shown when you subject the battery pack and camcorder to different conditions. 100% 75% 50% 25% CHANGE THE BATTERY PACK 0%