Canon Elura 20MC Elura 10 and Elura 20MC Instruction Manual - Page 51
Press the PHOTO button fully down to take the still picture.
View all Canon Elura 20MC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
• If the subject is unsuitable for autofocus ( 130), the camera may not be able to focus, and F may continue to flash white in the display. Continue to E hold the PHOTO button halfway down, then adjust the focus manually with the SELECT dial. • If you are using manual focus ( 72), the F mark starts as a continous green mark. Focus with the SELECT dial. 2. Press the PHOTO button fully down to take the still picture. • The camera takes the image immediately, and then records the "photo" to the tape for approximately 6 seconds*. During this time the camera also records the sound, and the display shows the still picture. • A counter display appears, and counts up as the camcorder records the picture. F disappears from the display. • The camera returns to record pause mode. • The camera automatically returns to record pause mode after recording a still image for approximately 6 seconds*. If you turn the POWER dial to OFF during that time, the camcorder will respond only after recording is complete. • The wireless controller's PHOTO button has no half-way setting. Press the button fully and the camera immediately takes the "photo". • Only take "photos" where it is bright enough to see the image in the display. • If you want to use an effect, make sure you set it before you take your picture. *8 seconds in SP or LP recording mode. Using the Full Range of Features 51