Canon ME-200S SH User Manual - Page 14

Example Configuration Example Configuration The following example configuration illustrates how to connect the camera to external devices such as a monitor (A 18) or video recorder (A 57). RC-V100 Remote Controller (optional) External monitor 14 Remote cable (supplied with the RC-V100) RC-V100's REMOTE A terminal External microphone (commercially available) BNC cable (commercially available) 3G/HD-SDI input Power cable (commercially available) External power supply BNC cable (commercially available) 3G/HD-SDI input External recorder NOTES • If you plan on connecting the optional RC-V100 Remote Controller to the camera using the optional RR-10 or RR-100 8-pin Remote Cable, check the serial number of the RC-V100. If the serial number starts with "01 xxxx" (where xxxx represents other digits), you will need to update the remote controller's firmware. Canon will perform this feature upgrade, and requires that the remote controller be sent to an accredited Canon Service Center. Shipping and handling charges may apply. Contact a Canon Customer Support Center for details. • When connecting the optional RC-V100 Remote Controller to the camera, make sure that the remote controller's terminal selection switch is set to match the terminal to be used on the camera.