Canon ME-200S SH User Manual - Page 15

Preparations, Preparing the Power Supply, Using the DC IN 1 Terminal

Get Canon ME-200S SH PDF manuals and user guides View all Canon ME-200S SH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

2 Preparations Preparing the Power Supply Preparing the Power Supply You can power the camera using a commercially available external power supply connected to the DC IN 1 terminal (via a commercially available power cable with a female 4-pin XLR connector) or the DC IN 2 terminal (via a commercially available power cable, using the supplied power connector). 15 For the USA and Canada only The external power supply and power cable must conform to the following specifications and be certified to meet safety standards set by UL, CSA or similar organization. The power supply should also comply with IEC/UL60950-1 (SELV/LPS) standards. External power supply (commercially available) Power supply (output): 11 to 17 V DC Current (output): 3 A or higher Power cable (commercially available) Power cable rating: 3 A or higher (current-carrying capacity) / 30 V DC (rated) Using the DC IN 1 Terminal Refer to the following terminal configuration when selecting a power cable. DC IN 1 terminal configuration Pin Signal 1 Ground 2 Unused 3 Unused 4 11 to 17 V DC Terminal type: 4-pin XLR (male connector) 1 Set the Q switch to OFF. 2 Connect the 4-pin XLR connector to the DC IN 1 terminal.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
15
2
Preparations
Preparing the Power Supply
You can power the camera using a commercially available external power supply connected to the
DC IN 1 terminal (via a commercially available power cable with a female 4-pin XLR connector) or the
DC IN 2 terminal (via a commercially available power cable, using the supplied power connector).
For the USA and Canada only
The external power supply and power cable must conform to the following specifications and be
certified to meet safety standards set by UL, CSA or similar organization.
The power supply should also comply with IEC/UL60950-1 (SELV/LPS) standards.
External power supply (commercially available)
Power supply (output): 11 to 17 V DC
Current (output): 3 A or higher
Power cable (commercially available)
Power cable rating: 3 A or higher (current-carrying capacity) / 30 V DC (rated)
Using the DC IN 1 Terminal
Refer to the following terminal configuration when selecting a power cable.
1
Set the
Q
switch to OFF.
2
Connect the 4-pin XLR connector to the DC IN 1
terminal.
DC IN 1 terminal configuration
Pin
Signal
1
Ground
2
Unused
3
Unused
4
11 to 17 V DC
Terminal type: 4-pin XLR (male connector)