Canon ME-200S SH User Manual - Page 63

Camera], SMPTE], Automatic], Menu Options

Get Canon ME-200S SH PDF manuals and user guides View all Canon ME-200S SH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Menu Options Menu item [Focus Control] [Tele-converter] [EF-S Lens] [ABB] [Color Bars] [Infrared] [ND Mode] [Periph.Illum.Corr.] Submenu / Setting options [Camera], [Lens] Determines the signal path used to adjust the focus. [Camera]: Default setting for most cases. [Lens]: You can adjust the focus using an accessory connected to the lens but you will not be able to use the camera's autofocus functions or an optional RC-V100 Remote Controller connected to the camera to adjust the focus. 63 [8x], [4x], [2x], [Off] Allows you to digitally increase the focal length of the camera by a factor of approx. 2, 4 or 8. Note that the image is digitally processed so the image will deteriorate throughout the zoom range. [On], [Off] When this setting is set to [On], reduces the peripheral illumination fall-off or vignetting that may occur when using an EF-S lens with this camera. However, the image is digitally enlarged by a factor of approx. 1.04 so the image will deteriorate slightly. [Cancel], [OK] Starts the procedure to adjust the black balance automatically (A 22). [Activate] [On], [Off] Turns color bars on/off. [Type] [SMPTE], [ARIB] (when the system frequency is 59.94 Hz) [EBU], [SMPTE] (when the system frequency is 50.00 Hz) Selects the type of color bars. The default setting depends on the country/ region of purchase. [On], [Off] Turns infrared mode on/off (A 48). [Automatic], [Manual] Determines how the ND filter is adjusted when the camera mode is set to [Auto]. [Automatic]: The ND filter is adjusted automatically by the camera. [Manual]: The ND filter can be adjusted manually (A 38). [On], [Off] When this setting is set to [On] and the camera has correction data for the attached lens, it compensates for the darkening of the image's corners (peripheral illumination drop) due to the lens's characteristics. If correction data for the lens is not available, the setting will appear grayed out. Note that depending on the shooting conditions, noise may appear in the periphery of the image as a result of the correction. Also, the level of correction will be lower the higher the gain level used.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Menu Options
63
[Focus Control]
[Camera]
, [Lens]
Determines the signal path used to adjust the focus.
[Camera]
: Default setting for most cases.
[Lens]
: You can adjust the focus using an accessory connected to the lens but
you will not be able to use the camera's autofocus functions or an optional
RC-V100 Remote Controller connected to the camera to adjust the focus.
[Tele-converter]
[8x], [4x], [2x],
[Off]
Allows you to digitally increase the focal length of the camera by a factor of
approx. 2, 4 or 8. Note that the image is digitally processed so the image will
deteriorate throughout the zoom range.
[EF-S Lens]
[On],
[Off]
When this setting is set to [On], reduces the peripheral illumination fall-off or
vignetting that may occur when using an EF-S lens with this camera. However,
the image is digitally enlarged by a factor of approx. 1.04 so the image will
deteriorate slightly.
[ABB]
[Cancel], [OK]
Starts the procedure to adjust the black balance automatically (
A
22).
[Color Bars]
[Activate]
[On],
[Off]
Turns color bars on/off.
[Type]
[SMPTE]
, [ARIB] (when the system frequency is 5
9
.
9
4 Hz)
[EBU]
, [SMPTE] (when the system frequency is 50.00 Hz)
Selects the type of color bars. The default setting depends on the country/
region of purchase.
[Infrared]
[On],
[Off]
Turns infrared mode on/off (
A
48).
[ND Mode]
[Automatic]
, [Manual]
Determines how the ND filter is adjusted when the camera mode is set to
[Auto].
[Automatic]
: The ND filter is adjusted automatically by the camera.
[Manual]
: The ND filter can be adjusted manually (
A
38).
[Periph.Illum.Corr.]
[On],
[Off]
When this setting is set to [On] and the camera has correction data for the
attached lens, it compensates for the darkening of the image's corners
(peripheral illumination drop) due to the lens's characteristics. If correction data
for the lens is not available, the setting will appear grayed out.
Note that depending on the shooting conditions, noise may appear in the
periphery of the image as a result of the correction. Also, the level of correction
will be lower the higher the gain level used.
Menu item
Submenu / Setting options