Canon ME-200S SH User Manual - Page 54
Gamma, Black Gamma, Black], Master Pedestal], Master Black Red], Knee]
View all Canon ME-200S SH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Custom Picture Settings Gamma Normal 2/3/4 Normal 1 Output Output 54 Normal 4 Normal 3 Normal 1/2 Normal 1 Wide DR Canon Log Input Input [Black] > [Master Pedestal] The master pedestal increases or decreases the black level. Higher settings will make dark areas brighter but decrease contrast. This setting can be adjusted from -50 to 50. (Default: ±0) [Black] > [Master Black Red], [Master Black Blue] These settings correct the color cast in blacks. Each can be adjusted from -50 to +50. (Default: ±0) [Black Gamma] Raises or lowers the lower part of the gamma curve (dark areas of the image). When [Gamma] is set to [Wide DR] or [Canon Log], this setting has no effect on the picture. This setting can be adjusted from -50 to 50. (Default: ±0) Black Gamma Output Level Input [Knee] Controls the upper part of the gamma curve (highlights of the image). By compressing the highlights, you can prevent parts of the image from being overexposed. When [Gamma] is set to [EOS Std.], [Wide DR] or [Canon Log], this setting has no effect on the picture. [Activate]: Activates/deactivates the setting. (Default: [On]) [Slope]: Determines the slope of the gamma curve above the knee point. This setting can be adjusted from -35 to 50. (Default: ±0) [Point]: Sets the knee point of the gamma curve. This setting can be adjusted from 50 to 109. (Default: 95)