Canon ME-200S SH User Manual - Page 42

Adjusting the Focus Adjusting the Focus The camera offers the following ways to focus and incorporates Dual Pixel CMOS AF technology for advanced autofocus performance. See also the general notes at the end of this section (A 46). Manual focus: Turn the focus ring on the lens to adjust the focus. One-shot AF*: With the lens's focus mode switch set to AF, you will be able to focus manually but still 42 have the option to press an assignable button set to [One-Shot AF] to let the camera focus automatically once. Continuous AF*: The camera continuously focuses on the subject at the center of the screen. * Not available when a manual focus lens or a CN20x50 IAS H/E1 lens is attached to the camera. Focusing methods and required settings Focusing method Manual focus Focus ring FOCUS dial on an optional RC-V100 Remote Controller connected to the camera One-shot AF Assignable button set to [One-Shot AF] Focus mode switch on an EF lens** MF (MANU.) AF (SERVO) AF (SERVO) Continuous AF AF (SERVO) [Camera Setup] > [AF Mode] setting - [One Shot] [One Shot] [Continuous (Always On)], [Continuous (Auto Off)] ** In parentheses is the corresponding position of the focus operation change-over knob on a CINE-SERVO lens. Manual Focus Focus manually using the focus ring on the lens. 1 Set the focus mode switch on the lens to MF. • On a compatible CINE-SERVO lens (A 71), set the focus operation change-over knob to MANU. and set the camera's AF mode to [One Shot] (step 3 in the following procedure, A 43). 2 Turn the lens's focus ring to adjust the focus. NOTES • With some EF lenses, you may be able to operate the focus ring even when the focus mode switch is set to AF. • When using the optional RC-V100 Remote Controller to adjust the focus, set the focus mode switch to AF (or the focus operation change-over knob to SERVO).