Canon ME-200S SH User Manual - Page 29

Shooting Video Left side and center of the screen Display Description Custom Display ABCDEFGHIJKLMNOP Camera name (A 66). [Camera Name] AF, C. AF Autofocus operation (A 43, 45). [Continuous AF] • [AF] appears only while the one-shot AF function ([C. AF] display only) is being used. • When [C. AF] appears in red, continuous AF has 29 stopped working or cannot be used. CP1 to CP6, EOS, WDR, C.Log Currently selected custom picture file (A 52). [Custom Picture] Temp. (in red) Temperature warning (A 67). [Temperature Warning] Fan (in red) Fan warning (A 67). - Lens (in red) Lens error warning (A 67). [Lens Error] AWB, WB-A, WB-B, Dylt, Tung, Kelv White balance (A 39). 00000K, ±0 [White Balance] Auto, Manual Camera mode (A 31). [Camera Mode] F0.0, Clsd Aperture value (A 33). [Iris] • [Clsd] (fully closed iris) appears only when a compatible CINE-SERVO lens (A 71) is attached to the camera. 00.0dB Gain value (A 36). [Gain] Right side of the screen Date/time Gen. Rec Display 1/0000 ND Off, ND 1/8, ND 1/64 IR Description Date and time. Genlock (A 59). Recording command being output to an external recorder (A 57). Shutter speed (A 37). ND filter setting (A 38). Infrared mode (A 48). Custom Display [Date/Time] - - [Shutter Speed] [ND Filter/Infrared] [ND Filter/Infrared] NOTES • Press the CANCEL button to stop showing the camera's onscreen displays on the shooting screen; press the button again to show all onscreen displays again. • For external monitors that support only 480P or 576P input, connect the camera using the HDMI OUT teminal. • When the output signal is 480P or 576P, onscreen displays will not be superimposed on the video signal. • Onscreen displays will not be superimposed on the video signal output from the 3G/HD-SDI 2 terminal. To output onscreen displays, use the 3G/HD-SDI 1 / MONITOR terminal or HDMI OUT terminal.