Canon ME-200S SH User Manual - Page 43
One-Shot AF, Set the focus mode switch on the lens to AF., Set an assignable button to [One-Shot AF].
View all Canon ME-200S SH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Adjusting the Focus • When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the focus with the remote controller's FOCUS dial. At default settings, turn the dial right to focus farther and left to focus nearer. Refer to the instruction manual of the RC-V100 for details on changing that setting. • To be able to adjust the focus using an accessory connected to the lens, you will need to change the [Camera Setup] > [Focus Control] setting to give priority to the lens. 43 One-Shot AF With one-shot AF, you will focus manually in most situations but still have the option to press a button to have the camera focus automatically only one time. 1 Set the focus mode switch on the lens to AF. • On a compatible CINE-SERVO lens (A 71), set the focus operation change-over knob to SERVO. [Camera Setup] 2 Set an assignable button to [One-Shot AF]. [Other Functions] > [Assignable Buttons] > Desired button ([1] to [4 (Remote)]) > [One-Shot AF] 3 Set the AF mode to [One Shot]. [Camera Setup] > [AF Mode] > [One Shot] [AF Mode] [One Shot] 4 Press and hold the assignable button. • While the camera is trying to focus on a subject, [AF] will flash quickly on the left of the screen. When the correct focus has been achieved, it will stop flashing and stay on. • When one-shot AF is not available or the camera cannot focus on a subject, [AF] will flash in red on the screen. • [AF] will disappear when you release the assignable button. NOTES • One-shot AF is not available for the following shutter speed settings. - 1/4, 1/5, 1/6 (at a system frequency of 59.94 Hz with a frame rate other than 23.98P) - 1/3, 1/4, 1/5 (at a system frequency of 59.94 Hz with a frame rate of 23.98P) - 1/3, 1/4, 1/5 (at a system frequency of 50.00 Hz)