Canon MultiPASS C3000 User guide for the MPC3000. - Page 55
Uncurling Back Print Film, protective packaging until you are ready to use them.
View all Canon MultiPASS C3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
r Do not leave the film in the sheet feeder for long periods of time. Dust and dirt may accumulate on the film resulting in spotty printing. r To avoid smudging caused by fingerprints, use a pair of thin cloth gloves while loading and handling the film. r To avoid fading, do not expose the printed film to prolonged sunlight. r Store unused papers and films flat. Do not remove papers from their protective packaging until you are ready to use them. r Store unused film at temperatures between 59°F to 86°F (15°C to 30°C). The relative humidity should be between 10% and 70%. Uncurling Back Print Film If Back Print Film becomes curled, follow these steps to uncurl it: 1 Cover the non-glossy side of the film with a sheet of plain paper. 2-30 Printing With the MultiPASS C3000 Chapter 2