Canon PC430 Service Manual - Page 21
B, PC420/430/FC220, Copying on OHP Film, Press the Copy Start key.
UPC - 030275150322
View all Canon PC430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
CHAPTER 1 GENERAL DESCRIPTION 7) Press the Copy Start key. PC420/430/FC220 • To stop continuous copying, press the Clear/Stop key; the copier finishes the ongoing copy and stops. The copy count displays the initial count. Copying on OHP Film • Set one sheet of film on the pick-up tray for each copy. • Depending on the environment of the site, a press on the Copy Start key may not pull the film inside the copier; if this is the case, perform the following: 1) Place copy paper under the film; stagger the sheet and film so that the leading edge of the film is about 1 cm behind that of the paper. 1cm Figure 1-403B 2) Hold the trailing edge of the copy paper, and set the sheet and film on the pick-up tray. 3) While holding the trailing edge of the copy paper, press the Copy Start key. Remove the paper when the film begins to move into the copier; the paper will no longer serve its purpose. Figure 1-404B Note: Take away each OHP film delivered to the copy tray. COPYRIGHT © 1998 CANON INC. CANON PC400/420/430,FC200/220 REV.0 JAN.1998 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-9