Canon PC430 Service Manual - Page 94
B. Registration Roller, Assembly, Detaching the Registration Roller, B
UPC - 030275150322
View all Canon PC430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
CHAPTER 5 PICK-UP/FEEDING SYSTEM B. Registration Roller Assembly 1. Detaching the Registration Roller Assembly 1) Detach the copyboard drive assembly. 2) Remove the two screws (M4X10; black) q, and detach the registration roller assembly w while lifting its front slightly and as if to move it to the front. Note: When installing the registration roller assembly to the copier, be sure that the sheet shown in Figure 5-502B is between the upper and lower registration rollers. Figure 5-501B Sheet Registration roller (lower) Figure 5-502B 5-14 COPYRIGHT © 1998 CANON INC. CANON PC400/420/430,FC200/220 REV.0 JAN.1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Note:
When installing the registration
roller assembly to the copier, be
sure that the sheet shown in Figure
5-502B is between the upper and
lower registration rollers.
COPYRIGHT © 1998 CANON INC.
CANON PC400/420/430,FC200/220 REV.0 JAN.1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-14
CHAPTER 5 PICK-UP/FEEDING SYSTEM
B. Registration Roller
Assembly
1.
Detaching the Registration Roller
Assembly
1)
Detach
the
copyboard
drive
assembly.
2)
Remove the two screws (M4X10;
black)
q
, and detach the registration
roller assembly
w
while lifting its
front slightly and as if to move it to
the front.
Figure 5-501B
Figure 5-502B
Sheet
Registration roller (lower)