Canon PIXMA MP800 Service Manual - Page 33
See 3, Verification Items, 1 Service test print., 2 EEPROM, information print., Adjustment / Settings - cleaning print head
View all Canon PIXMA MP800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
1 time 2 times 3 times 4 times 5 times 6 times 7 times 8 times 9 times 10 times 11 times 12 times 13 times 14 times 15 times 16 to 21 times Orange (Alarm) Green (COPY) Orange (Alarm) Green (COPY) Orange (Alarm) Green (COPY) Orange (Alarm) Green (COPY) Orange (Alarm) Green (COPY) Orange (Alarm) Green (COPY) Orange (Alarm) Green (COPY) Orange (Alarm) Green at even numbers (COPY) Orange at odd numbers (Alarm) Service test print EEPROM information print EEPROM initialization Waste ink counter resetting Destination settings Print head deep cleaning LF correction CD / DVD check pattern print CD / DVD print position correction (horizontal: X direction) CD / DVD print position correction (vertical: Y direction) Button and LCD test Return to the menu selection Return to the menu selection Left margin correction Waste ink amount setting Return to the menu selection See 3-4. Verification Items, (1) Service test print. Set a sheet of A4 or letter size paper. See 3-4. Verification Items, (2) EEPROM information print. The following items are NOT initialized, and the shipment arrival flag is not on: - USB serial number - Destination settings - Waste ink counter - CD / DVD correction value - LF correction value Once in the service mode: Press the On/Off button 2x after pressing the Stop button 4x. See 3-3. Adjustment / Settings, (8) Service mode, "Destination settings procedures." (Cleaning of both black and color) See 3-3. Adjustment / Settings, (8) Service mode, "LF correction procedures." Not used in servicing Not used in servicing. Not used in servicing. See 3-3. Adjustment / Settings, (8) Service mode, "Button and LCD test procedures" Not used in servicing. See 3-3. Adjustment / Settings, (8) Service mode, "Waste ink amount setting procedures" Note: - If the Stop/Reset button is pressed 16 or more times, the Alarm LED (orange) or COPY button (green) lights steadily without any changes. - At the end of the service mode, press the ON/OFF button. To protect the media sensor from being dislocated during transportation, the paper lifting plate of the sheet feeder unit will be raised. In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed in the table below, and press the ON/OFF button. Time(s) 0 times LED indication Destination Green (COPY) No change of the destination CD / DVD print 1 time 2 times Orange (Alarm) Japan Green (COPY) Korea Supported Not supported 1-28