Canon PIXMA MP800 Service Manual - Page 36

Canon PB PAPER GF-500, Office Planner, HP BrightWhite, OFFICE 80 - refurbished

Get Canon PIXMA MP800 PDF manuals and user guides View all Canon PIXMA MP800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

2 times 3 times or more absorbers Not valid Only the main waste ink absorber is valid for the MP800 Press the ON/OFF button to return to the waste ink amount setting mode. 3) Press the ON/OFF button to proceed to the next step. 4) The waste ink amount can be set in 10% increments by pressing the Stop/Reset button. Press the Stop/Reset button the appropriate number of time(s) to select the value which is closest to the actual waste ink amount. Time(s) 0 times 1 time 2 times 3 times 4 times 5 times 6 times 7 times 8 times 9 times 10 times or more Waste ink amount value to be set (%) 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% Not valid. Press the ON/OFF button to return to the waste ink amount setting mode. 5) Press the ON/OFF button to set the selected value to the EEPROM. Print EEPROM information to confirm that the value is properly set to the EEPROM. After replacement of the feed roller ass'y or logic board ass'y in repair servicing or in refurbishment operation, adjust the line feeding. 1) In the LF correction mode, press the Stop/Reset button the specified number of times according to the paper to be used in LF correction listed in the table below, then press the ON/OFF button. Time(s) 1 time 2 times 3 times 4 times Paper type High Resolution Paper Plain paper Paper name Canon HR-101 Canon PB PAPER GF-500, Office Planner HP BrightWhite, OFFICE 80 Canon Extra, STEINBEIS Note: - The High Resolution Paper is the most desirable for LF correction printing (Canon HR-101 is used at the production site), but 6 kinds of plain paper listed in the table above can also be used in LF correction. If plain paper other than the above is used, select any one of the paper types in this step, then select Pattern No. 0 (zero) in the step 3) below. - Each time the Stop/Reset button is pressed, the Alarm LED and the COPY button light alternately, Alarm in orange and COPY in green. - If the Stop/Reset button is NOT pressed, and only the ON/OFF button is pressed, the machine remains in the LF correction mode. - If the Stop/Reset button is pressed 5 times or more, then the ON/OFF button is pressed, the machine returns to the service mode menu selection. 2) The LF correction pattern for the selected paper is printed. 1-31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
3)
Press the ON/OFF button to proceed to the next step.
4)
The waste ink amount can be set in 10% increments by pressing the Stop/Reset button. Press the Stop/Reset button the
appropriate number of time(s) to select the value which is closest to the actual waste ink amount.
5)
Press the ON/OFF button to set the selected value to the EEPROM. Print EEPROM information to confirm that the value is
properly set to the EEPROM.
<LF correction procedures>
After replacement of the feed roller ass'y or logic board ass'y in repair servicing or in refurbishment operation, adjust the line
feeding.
1)
In the LF correction mode, press the Stop/Reset button the specified number of times according to the paper to be used in LF
correction listed in the table below, then press the ON/OFF button.
Note:
- The High Resolution Paper is the most desirable for LF correction printing (Canon HR-101 is used at the production site),
but 6 kinds of plain paper listed in the table above can also be used in LF correction. If plain paper other than the above is
used, select any one of the paper types in this step, then select Pattern No. 0 (zero) in the step 3) below.
- Each time the Stop/Reset button is pressed, the Alarm LED and the COPY button light alternately, Alarm in orange and
COPY in green.
- If the Stop/Reset button is NOT pressed, and only the ON/OFF button is pressed, the machine remains in the LF correction
mode.
- If the Stop/Reset button is pressed 5 times or more, then the ON/OFF button is pressed, the machine returns to the service
mode menu selection.
2)
The LF correction pattern for the selected paper is printed.
2 times
absorbers
Only the main waste ink absorber is valid for the MP800
3 times or
more
Not valid
Press the ON/OFF button to return to the waste ink
amount setting mode.
Time(s)
Waste ink amount value to be set (%)
0 times
0%
1 time
10%
2 times
20%
3 times
30%
4 times
40%
5 times
50%
6 times
60%
7 times
70%
8 times
80%
9 times
90%
10 times or more
Not valid.
Press the ON/OFF button to return to the waste ink amount setting mode.
Time(s)
Paper type
Paper name
1 time
High Resolution Paper
Canon HR-101
2 times
Plain paper
Canon PB PAPER GF-500, Office Planner
3 times
HP BrightWhite, OFFICE 80
4 times
Canon Extra, STEINBEIS
1-31