Canon PIXMA MP800 Service Manual - Page 34

3 times Orange (Alarm) US Not supported 4 times Green (COPY) Europe Supported 5 times Orange (Alarm) Australia Supported 6 times Green (COPY) Asia Supported 7 times Orange (Alarm) China Supported 8 times Green (COPY) Taiwan Supported 9 times or more Orange (Alarm) Return to the menu selection Note: After setting the destination without logic board replacement, be sure to initialize the EEPROM (to prevent the Print Beam settings or copy paper settings from being different from the destination settings). Confirm the model name and destination in service test print or EEPROM information print. [See 3-4. Verification Items, (1) Service test print, or (2) EEPROM information print.] Confirm the operation after replacement of the operation panel unit, logic board, or LCD. 1) Press the Stop/Reset button. The LCD turns blue, waiting for a button to be pressed. 2) Press each button on the operation panel. The LCD is divided into segments, representing each button. The color of a segment corresponding to the pressed button changes to red. 3) When all the buttons are pressed, the entire LCD changes to a full red screen, and no further pressing of the buttons is accepted. 1-29