Canon PIXMA MP800 Service Manual - Page 35
See 3, Verification Items, 2 EEPROM information print.], Main waste ink absorber
View all Canon PIXMA MP800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
4) Open the scanning unit (printer cover) to display the color pattern. Only the ON/OFF button is enabled. 5) Press the ON/OFF button to return to the service mode menu selection. Set the waste ink amount data to a replaced new EEPROM after the logic board is replaced in servicing. 1) Before replacement of the logic board ass'y, check the waste ink amount in EEPROM information print. [See 3-4. Verification Items, (2) EEPROM information print.] 2) In the waste ink amount setting mode, press the Stop/Reset button the specified number of time(s) according to the waste ink absorber whose value should be transferred to the replaced new EEPROM. (Only the main waste ink absorber for the MP800) Time(s) 0 times 1 time Waste ink absorber Main waste ink absorber Platen waste ink absorber Both the main and platen waste ink Remarks Not valid for the MP800 1-30