Canon PIXMA iP6000D iP6000D Diect Print Guide - Page 77
When Automatic Print Head Aligning Cannot Be Executed Correctly
View all Canon PIXMA iP6000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Note When Automatic Print Head Aligning Cannot Be Executed Correctly When automatic print head aligning cannot be executed correctly, the POWER lamp flashes orange 11 times and the message "Failed to align print head" is displayed on the LCD. Please follow the procedure below. 1. Press the RESUME button to clear the error. 2. Open the cover and check if there is ink left. If there is no ink left, replace the ink tanks. See "Replacing Ink Tanks" on page 67. 3. Print the nozzle check pattern to verify that the print nozzles are clean. See "Printing the Nozzle Check Pattern" on page 71. 4. Move the printer so that the paper output slot is not in direct sunlight and try automatic print head aligning again. 5. If the error persists, adjust the print head manually. See "Adjusting the Print Head Manually" on page 78. 76